Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
- Recommended Molding Conditions
- Feed throat – 140C (throat cooling recommended to prevent blocking)
- Barrel Temperatures – 160 – 190C
- Die Temperature – 170C;
- Screw speed – 30 – 60;
- Injection Pressure: Low to medium;
- Injection Speed: Medium to fast;
- Cooling Time: (depends on part thickness) 20 – 50 sec.
Properties
- Mechanical Properties
- Physical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Elongation (Break) | 520 | % | ASTM D412 |
Modulus (100%) | 0.7 | Mpa | ASTM D412 |
Modulus (300%) | 1.93 | Mpa | ASTM D412 |
Value | Units | Test Method / Conditions | |
Durometer | 27 - 30 | Shore A | ASTM D2240 |
Melt Viscosity (190C, 227 sec-1) | 303 | Pa-sec | APA QC20 |
Tear Strength | 70 | KN/mm | ASTM D624 |
Tensile Strength (Break) | 3.7 | Mpa | ASTM D412 |
Value | Units | Test Method / Conditions | |
Specific Gravity | 0.89 | g/cm³ | ASTM D792 |
Tensile Set (100% Strain, 1 min Hold) | 3 | % | ASTM D412 |
Regulatory & Compliance
- Certifications & Compliance