Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- PRODUCT FEATURES
- Easy spreading and wipe characteristics
- Provides positive releases, remains soft and ease of removal
- Effectively fills rough surfaces and is PVA compatible
- Good thermal stability with reduced build up
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- USES
For all mold flanges, edges and hats in cultured marble, onyx or granite production, tubs, showers, spa fabrication, polymer concrete and general polyester molding applications. Any surface where gloss or cosmetics is not a critical requirement for finished part. Sealer on porous substrates (wood, plaster, etc.) for prototypes and mock-ups or in conjunction with PVA sprayed film.
- APPLICATION
Apply a minimum of two coats with brush or cloth allowing each coat to dry prior to applying additional coats. This provides a base film for initial release. Apply again lightly after first part is pulled and then subsequent coats as needed. Applications will vary dependent on surface conditions, molding cycle, fabrication methods and general shop practices.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Dry Time (75°F/24°C room temperature) | 10-15 | minutes | — |
| Wax Melting or Softening Point | 165 | °F | — |
| Density | 0.805 | — | — |
| Wt./Gal | 6.71 | lbs,/gal | — |
| Flash Point | 120 (49) | °F (°C) | — |
Packaging & Availability
- Packaging Type
- PACKAGING
Available in gallon 4x1/cases, 5 gallon and 55 gallon drum.
Storage & Handling
- STORAGE AND PRECAUTIONS
Flammable liquid, store in a cool dry place and keep in original unopened container. Keep away from spark, open flame or other sources of ignition. Use in well ventilated area.