Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- PRODUCT FEATURES
- High Temperature properties (500°F)
- Minimal or no transfer when properly applied and not in excess
- Easy “wipe on – leave on” or spray application
- Excellent detailed reproduction of parts
- Applicable to wide range of molding processes and materials
- Quick drying speeds production cycles
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- USES
- Compression & Pre-preg molding
- Injection molding
- Hand lay-up/Casting
- Vacuum bag/RTM
- Filament winding/Vacuum forming
- APPLICATION
Apply a uniform coat by spray, brush, wipe or dip, avoiding excessive amount or flooding when sprayed. Recommended spray application using medium pressure with semi-wide fan pattern. High spray pressures and low fluid flow can result in a dry film deposit and poor adhesion to the mold surface. Apply 2 coats on new molds in cross direction; allow drying before beginning molding process. Use subsequent applications as needed. Rough or porous surface molds may need additional break-in coats or a sealer. Multiple releases can be achieved before recoat is necessary and will vary according to mold design, process and materials incorporated.
NOTE: Some settling does occur as product sits or is stored requiring agitation before and during use to ensure uniformity of applied release coat.
Properties
- Physical Form
Packaging & Availability
- Packaging Type
- PACKAGING
Available in gallon 4x1/cases, 5 gallon and 55 gallon drum.
Storage & Handling
- STORAGE AND PRECAUTIONS
Contains flammable solvents. Store in a cool dry place and keep in original un-opened container away heat, open flame and sparks.