Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Exceptional versatility
- Good film build
- Sandable
- Good adhesion to most substrates
- Near zero VOC
Applications & Uses
- Markets
- Applications
- Uses
AllPrime was formulated to adhere well to most surfaces, wood, metal, and masonary. AllPrime is an excellent choice for use as a primer under Triangle’s 70 Series Pure & Natural architectural finishes.
AllPrime is ideal for use on:- Walls and Siding
- Window frames, trim and facias
- Office suites
- Hospital interiors
- Commercial buildings
- Residential complexes
AllPrime will properly prepare surfaces such as:
- Aluminum lap siding
- Masonry and brick
- Plywood
- Stucco
- Hardboard or wood
- Limitations
- Not recommended for submersion, below grade, or direct chemical contact service
- Not recommended for traffic bearing surfaces or service in a chemical environment
- Surface pH must be 10.0 or less
- Not recommended to prevent corrosion on iron or steel when used in severe environments
- Application Data
Surface Preparation:
- Before use, thoroughly test this product on a sample to assure correct color, appearance, and performance.
- Remove allloose or flaking paintand contaminants. Repair cracked or spalled masonry. Replace rotted or decaying wood and reset nails. Caulk all open seams that may allow moisture into wood surface.
- Surfaces must be completely dry and free of contaminants. Ex: oil, wax, silicone, chalk, and efflorescence.
- Both surface temperature and ambient temperatures must be above 50°F (10°C) and remain above 50°F (10°C) for four hours after application. Relative humidity should be below 85%.
- Applications
Apply AllPrime by brush, roller, or airless spray. Application choice is a function of substrate and job conditions. Use a brush or airless spray for finished lumber, smooth hardboard, and all trim. Heavily textured and porous surfaces such as plywood, stucco, and masonry should be rolled or back rolled if sprayed.
Brush:
Bristles: nylon polyester
Apply liberally, work into recesses, scrubbing or stippling if necessary.
Roller:
Cover: 3/4" - 1" nap
Apply liberally in X or V pattern. Roll over and force into depressions for uniform coverage.
Airless:
Fluid Tips: 013 - .015”
Fluid Pressure: 1700 - 1800 psi
1/2 gpm or larger pumps are recommended.
Surfaces mustbe dry and protected from all moisture until rainproof, as per dry schedule.
Thinning: None
Cleanup: Water
Clean Tools And Hands With Soapy Water.
Technical Details & Test Data
- Coverage
- Theoretical at 1.0 mils DFT - 577 sq ft/gal
- Recommended DFT - 1.5-2.0 mils
- Dry Schedule
50°F 77°F Dry to Touch 12hrs 30 mins Recoat 3 hrs 4 hrs Rainproof 8 hrs 4 hrs After 1 week, light sanding may be necessary if recoating required.
Safety & Health
- Health and Safety
Warning:
LIQUID CONTACT WITH EYE AND SKIN MAY CAUSE IRRITATION. DO NOT INGEST. Wash hands thoroughly after using this product. If spillage has occurred, absorb and dispose of according to local regulations.
First Aid:
Inhalation:|f symptomatic, move to fresh air. Get medical attention if symptoms persist. Eyes: Any material that contacts the eye should be washed out immediately with water. If easy to do, remove contact lenses. Get medical attention if symptoms persist. Skin: Wash with soap and water. Get medical attention if symptoms occur. Ingestion: Seek medical advice.
KEEP THIS PRODUCT OUT OF THE REACH OF CHILDREN.
Packaging & Availability
- Color Availability
AllPrime is packaged as white. Other colors are available upon request.
- Packaging
Order Code - 281 AllPrime
- Six 1 quart cans per case
- Four 1 gallon cans per case
- 5 gallon pails
- 55 gallon drums (available upon request)
- 250 gallon totes (available upon request)
Storage & Handling
- Shipping and Handling
Shipping Description: [cfr 49]
Ground, Air, Vessel....... Non Regulated Material
Required Label & Marking .......... Not Required
IMDG Packaging: ............... ... Not Required
IMDG Stowage: .............0 Not Regulated
Uniform Fire Code: [cfr 29] ......... Class Iii-b
Storage Temperature. .............. 120° F Max
Shelf Life: [warranted] .................1 Year
HMIS Ratings: ............. H-1;F-0;R-0;PP-B