Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Stabilizer
- Surfactant
- Film appearance Density
- Glossy, Transparent & Non tacky
- Technologies
- Product Families
- Chemical nature
Styrene acrylic copolymer.
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Key Benefits
- General purpose binder
- Excellent scrub resistance
- High water and alkali resistance
- High pigment binding
- Good gloss film
- High tinting strength
Applications & Uses
- Markets
- Coating Type
- Applications
- Interior emulsion paint
- Semi-gloss and gloss emulsion paint
- Matt emulsion paint
- Water borne varnish
- General Use
TRITEX SA 50 is suitable for matt, silk and gloss emulsion paint. Use of suitable coalescent recommended to obtain best film properties
TRITEX SA 50 is compatible with all commonly encountered paint ingredients.
A wet state biocide is included for storage but it is recommended that further biocide is introduced at compounding stage- General Use
TRITEX SA 50 is suitable for matt, silk and gloss emulsion paint. Use of suitable coalescent is recommended to obtain best film properties
TRITEX SA 50 is compatible with all commonly encountered paint ingredients.
A wet state biocide is included for storage but it is recommended that further biocide is introduced at compounding stage
Properties
- Appearance
- White Emulsion
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Solid Content | 50 ±2 | % | - |
| Brookfield Viscosity | 1000 - 3000 | cps | - |
| Density | 1.04 ±0.05 | - | - |
| pH | 7 - 9 | - | - |
| Particle size | 0.05 - 0.12 | microns | - |
| MFFT | 18 ±2 | ºC | - |
| Free Monomer | max. 0.1 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety
TRITEX SA 50 is water-borne and non-toxic under normal use. Details are given in the SDS for individual products.
Storage & Handling
- Storage
Under suitable conditions, the product can be stored for up to 12 months. Storage under shading is preferred; a temperature range of 5-40°C is recommended. High temperature may cause drying out and affect quality, especially if partly used containers are not tightly closed after use. If these conditions cannot be met, please contact the Technical Department for guidance.