company tower banner
TRISON POLYMERS Company Logo
TRITEX SA 50E is a water based elastic styrene acrylic copolymer APEO free and formaldehyde free, it is designed for imparting an elastic property to the film performance.

Chemical Family: Styrene-Acrylic Copolymer

End Uses: Waterborne Coating

Features: Alkali Resistance, Good Elasticity, High Pigment Loading, Water Resistance

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Carrier
CASE Ingredients Functions
Stabilizer
Surfactant
Film appearance Density
Clear, Transparent & Very flexible
Technologies
Chemical nature

Styrene acrylic with high acrylate content copolymer.

Features & Benefits

Key Benefits
  • Elastic behavior gives highly extensible film
  • No cracking film at low temperature
  • High pigment binding
  • Excellent water and alkali resistance

Applications & Uses

Coating Type
Applications
  • Flexible water proofing
  • Roof coating
  • Flexible mastics
  • Flooring adhesives
General Use

TRITEX SA 50E is designed for use highly elastic coating and tacky adhesives.

As with all soft polymers, the film formation of TRITEX SA 50E is achieved internally and usually no additional coalescent agent is necessary.

TRITEX SA 50E is compatible with all commonly encountered paint ingredients. A wet state biocide is included for storage but it is recommended that further biocide is introduced at compounding stage.

Properties

Physical Form
Appearance
White Emulsion
Typical Properties
ValueUnitsTest Method / Conditions
Solid Content50 ±2%
Brookfield Viscosity1000 - 3000cps
Density1.04 ±0.05
pH7 - 9
Particle size0.05 - 0.12microns
MFFTmax. 0 ±2ºC
Free Monomermax. 0.1%

Regulatory & Compliance

Certifications & Compliance

Safety & Health

Safety

TRITEX SA 50E is water-borne and non-toxic under normal use. Details are given in the SDS for individual products.

Storage & Handling

Storage

Under suitable conditions, the product can be stored for up to 12 months. Storage under shading is preferred; a temperature range of 5-40°C is recommended. High temperature may cause drying out and affect quality, especially if partly used containers are not tightly closed after use. If these conditions cannot be met, please contact the Technical Department for guidance.