Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Cure Method
- Recommended Uses
- 4101 is specifically designed as a protective sealant during the detail phase of complete elastomeric roof coating restoration work.
- This product is formulated to seal fasteners and seams and penetrations on a metal roof systems, seams and penetrations on single ply membrane systems and fill cracks and voids on older BUR systems. In addition, 4101 is an ideal all-purpose sealant to quickly and permanently seal leak areas on virtually any roofing system.
- General Application Instructions
- 4101 may be applied by heavy brush. Apply 4101 only to clean, dry, sound surfaces free of loose particles or other foreign matter.
- Base coats MUST be applied to 4101 coated sections within 48 hours to insure proper adhesion. Apply 4101 at the maximum thickness of 32 wet mils to ensure proper curing.
- Coverage Rates
Approx. 750 fasteners per gallon or 150 fasteners per 20 oz sausage tube; 100 linear feet of seam at 4” wide and 40 wet mils per gallon.
Properties
- Typical Physical Properties
Value | Units | Test Method / Conditions | |
Total Solids (Weight) | 77 - 81 | % | ASTMD1644 |
Weight Per Gallon | 9.0 - 9.4 | lb per gallon | - |
Flash Point | 80.0 | °F | - |
Viscosity | 20000 - 40000 | cP | - |
Elongation | 100 - 200 | % | - |
Hardness | 69.0 | Shore A | - |
Tensile Strength | 215 - 265 | psi | - |
Permeability | 0.02 | perm inch | - |
Service Temperature | -50 to 200 | °F | - |
Water Absorption | 2.4 | % | - |
Adhesion | Exceeds Tensile | - | - |
Cure Times (Dry To Touch) | 6.0 | hours | - |
Cure Times (Tack Free) | 12 - 16 | hours | - |
Cure Times (Recoat) | 12 - 16 | hours | - |
Safety & Health
- Limitations & Precautions
- Avoid application over unintended areas; adhesive properties make removal difficult after product has cured on any surface. Avoid moisture contamination in sealed containers.
- Store in dry environment between 55º and 75º. Keep away from heat, open flame or sparks.
- Use only in well ventilated areas with proper protective equipment. Avoid breathing vapor or mist.
Storage & Handling
- Shelf Life
- 90 days at 40°F to 90° F
- Clean Up
- Xylene