Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Identification
Available Colors
- White
- Light Gray
- Medium Gray
- Battleship Gray
- Light Tan
- Medium Tan
- Federal Brown
- Brick Red
- Light Blue
- Dark Blue
- Forest Green
- Safety Yellow
Available Sizes
- 1 gallon
- 5 gallons
- 55 gallons
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Applicable Roof Types
EPDM Single-Ply Roofs
EPDM roofing is prone to leaks at the seams and penetrations due to foot traffic and weather exposure. Whether your EPDM roof is new or needs amore intense restoration, protect it with the high tensile strength of ourdurable EPDM roof coating systems.
Hypalon Single-Ply Roofs
Continuous UV exposure is tough on Hypalon (CSPE) roofs. The sun and heat can cause heavy chalking and surface cracks, as well as pinholes in the membrane. The good news is that you don’t have to take on the cost of a complete tear-off and replacement. If your Hypalon roof is a good candidate, our SEBS coating systems provide an excellent solution to cover reinforcement scrim, protect against surface cracks and seal out moisture.
Metal Roof
With prolonged exposure to sun and weather, metal roofing systems inevitably deteriorate overtime — developing leaks, rust and corrosion. Years of heat-related expansion and contraction also loosen seams and fasteners, potentially damaging the roof and building structure. Whether you have a new metal roof or one in need of reinforcements, you can protect it and extend its lifespan with TRUCO Coatings easy-to-apply SEBS and Silicone roof coatings.
Modified Bitumen and BUR Roofs
When it comes to Modified Bitumen (MB) or Built-Up (BUR) roofs, constant sun and heat are your worst enemies. Prolonged heat and sun exposure weaken and deteriorate thesubstrate, creating significant leakage and moisture. Protect your MB or BURroof from UV exposure and lengthen the life of your roof with TRUCO Coatings SEBS and Silicone roof coatings.
SPF (Foam) Roofs
Spray Polyurethane Foam (SPF) roofing systems are greatly affected by wind, sunlight, moisture, humidity and the roof’s surface temperature. Our roof coating systems offer an easy-to-apply solution to protect your SPF roof from damage and deterioration. Save money on a full tear-off with strong, flexible SEBS and Silicone roof coatings from TRUCO Coatings — and ensure your roof can withstand harsh weather conditions for years to come.
TPO Single-Ply Roofs
Prolonged exposure to UV radiation from the sun can take a toll on TPO single-ply roofing systems,causing them to chalk heavily and develop pinholes and surface cracks. When the reinforcement scrim is exposed, the roofing membrane fails. TRUCO Coatings elastomeric roof coating not only protects TPO roofing from the sun, but also resists moisture and extreme weather for lasting durability. Silicone solutions for commercial building roofs provide long-lasting leak protection.
Properties
- Color
- Physical Form
- Specifications
| Value | Units | Test Method / Conditions | |
| Weight per Gallon | approx. 12.4 | - | - |
| Viscosity (80ºF) | 110 - 120 | KU | - |
| Non-Volatile Content | min. 65 | % | - |
| Percent Latex Solids | min. 20 | % | - |
| Percent Solids (By Volume) | min. 50 | % | - |
| Dry Film Thickness (Gal/100 Sq. Ft., Less Absorption By Surface) | 8.0 | Mils | - |
| Drying Time (To Touch, On Metal) | 1.5 | hours | - |
| Drying Time (Through Metal, 77ºF, 50% Rh) | 3.5 | hours | - |
| Cold Temperature Flex. (1” Mandrel, 0ºF) | No Cracks | - | - |
| Service Temperature Extended Exposure | -30 to 200 | ºF | - |
| Ultra Violet Light Resistance | Excellent | - | - |
| Effect Of Weathering | Slight Chalking | - | - |
| Resistance To Rainfall (After Thoroughly Dry, Minimum 8 Hours, 77ºF) | Excellent | - | - |
| Elongation To Break | 300.0 | % | - |
| Tensile Strength | 250.0 | psi | - |
| Fungus Resistance | Passes | - | - |
| Perm Rating | 5.0 | U.S. Perms | - |
| Chemical Resistance (To Mild Acid & Alkali Fumes) | Good | - | - |
| Recoat (80ºF) | Overnight | - | - |
| Solar Reflectance | min. 80 | % | - |
Storage & Handling
- Freeze Thaw Stability
- Excellent