Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Water Based
- Semi-gloss finish
- VOC compliant
- High Solids Formulation
- Excellent build on edges
- Rapid and extended recoat windows
- Single coat capability
- Excellent wetting and adhesion properties
- Good chemical resistance
- Suitable for use in USDA facilities
- Adheres to Galvanized Steel
Applications & Uses
- Markets
- Application Area
- Compatible Substrates & Surfaces
- Substrates
AquaGrip 2600 can be applied over the following primers or directly to steel or concrete as recommended. AquaGrip 2600 should be applied to cured ZincGard 1000 by thinning one pint/gallon with potable water and applying a mist coat approximately 3mils wet which seals the porous inorganic zinc. The mist coat is followed by another light coat to achieve the total desired film thickness. AquaGrip 2600 is applied without a mist coat to ZincGard 1500, EpoxyGrip 2100 and MasticGrip 2500. Consult SSPC-PS Guide 8.00 for topcoating zinc-rich primers.
- Topcoats
AquaGrip 2600, like other epoxies, tends to chalk and amber when exposed to sunlight in a humid environment. Urethane and acrylic topcoats are recommended to control the erosion of the epoxy and maintain a colorfast system. UreGrip 3000, UreGrip 3300, and AquaGrip 5000 are recommended topcoat for AquaGrip 2600.
- Pot Life
Four hours at 75° and less at higher temperatures.
- Film Thickness (Per Coat)
Dry film thickness: 2 to 5 mils
Wet film thickness: 5 to 11 mils
Theoretical coverage: 361 sq. ft. at 2 mils DFTNote: One coat is normally required; however, certain colors may require additional coats for hiding.
Properties
- Physical Properties
- Performance Properties
Value | Units | Test Method / Conditions | |
Abrasion Resistance (1 kg Load/1000 Cycles) | Weight loss | — | ASTM D 4060 |
Adhesion | 4031.0 | psi | ASTM D 4541 |
Continuous Temperature Resistance (Non-immersion) | 250.0 | °F | — |
Abrasion Resistance (CS 17 Wheel) | 22.0 | mg | ASTM D 4060 |
Impact Resistance (Direct Impact) | 80.0 | in-lbs. | ASTM D 2794 |
Non-Continuous Temperature Resistance (Non-Immersion) | 300.0 | °F | — |
Theoretical Coverage of Mixed Gallon (1 mil) | 722.0 | sq. ft. | — |
Theoretical Volume Solids of Mixed Material | 44 - 46 | % | — |
Volatile Organic Content Unthinned | 0.8 | lbs./gal. | — |
Value | Units | Test Method / Conditions | |
Salt Spray | 1000.0 | Hours | ASTM B 117 |
Regulatory & Compliance
- Qualifications
Exceed requirements of SSPC Paint 22 performance requirements.
Technical Details & Test Data
- Resistance
AquaGrip 2600 is resistant to a wide range of chemicals in atmospheric exposures. The following is a guide to the proper selection.
Exposure Immersion Splash & Spillage Fumes Acidic NR Good Good Alkaline NR Excellent Excellent Solvents NR Good Excellent Salt water Excellent Excellent Excellent Water Excellent Excellent Excellent NR=Not Recommended
Packaging & Availability
- Shipping Data
Packaging unit 1 gal. 5 gal. Part A 0.8 gal. 4 gal. Part B 0.2 gal. 1 gal. Shipping weights (approx.)
Package unit 12 lbs. 60 lbs. Reducer 1 8 lbs. 40 lbs. Flash Point: (Setaflash)
Part A Above 200°F Part B 110°F Reducer 1 53°F
Storage & Handling
- Shelf Life
1 year for both the Part A and B when stored inside at 40°F to 110°F.