Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Direct to Metal
- Semi-gloss finish
- VOC compliant
- High Build Formulation
- Acceptable for use on UFGS 099713.27
- Excellent build on edges
- Rapid and extended recoat windows
- Single coat capability
- Excellent wetting and adhesion properties
- Good chemical resistance
- 1:1 Mixing Ratio
Applications & Uses
- Application Area
- Substrates
EpoxyGrip 2005 is normally applied directly to steel. EpoxyGrip 2005 can be applied to cured ZincGuard 1000, ZincGuard 1500, EpoxyGrip 2100, and MasticGrip 2500. Consult SSPC-PS Guide 8.00 for topcoating zinc-rich primers.
- Topcoats
When additional protection is required, EpoxyGrip 2005 may be topcoated with a urethane such as UreGrip 3000 or VSC1200.
- Pot Life
Three hours at 75° and less at higher temperatures.
- Film Thickness (Per Coat)
Dry film thickness: 8 to 10 mils
Wet film thickness: 10 to 12 mils
Theoretical coverage: 160 sq. ft. at 8 mils DFTNote: One coat is normally required; however, certain colors may require additional coats for hiding.
Properties
- Physical Properties
- Performance Properties
| Value | Units | Test Method / Conditions | |
| Abrasion Resistance (1 kg Load/1000 Cycles) | Weight loss | — | ASTM D 4060 |
| Adhesion | 4031.0 | psi | ASTM D 4541 |
| Continuous Temperature Resistance (Non-immersion) | 250.0 | °F | — |
| Abrasion Resistance (CS 17 Wheel) | 22.0 | mg | ASTM D 4060 |
| Impact Resistance (Direct Impact) | 80.0 | in-lbs. | ASTM D 2794 |
| Non-Continuous Temperature Resistance (Non-Immersion) | 300.0 | °F | — |
| Reducer 1 (1 pint/gal.) | 2.04 | lbs./gal. | — |
| Reducer 2 (1 pint/gal.) | 2.09 | lbs./gal. | — |
| Theoretical Coverage of Mixed Gallon (1 mil) | 1283.0 | sq. ft. | — |
| Theoretical Volume Solids of Mixed Material | 79 - 81 | % | — |
| Volatile Organic Content Unthinned | 1.44 | lbs./gal. | — |
| Value | Units | Test Method / Conditions | |
| Salt Spray | 1000.0 | Hours | ASTM B 117 |
Regulatory & Compliance
- Qualifications
Exceed requirements of SSPC Paint 22 performance requirements.
Technical Details & Test Data
- Resistance
EpoxyGrip 2005 is resistant to a wide range of chemicals in atmospheric exposures. The following is a guide to the proper selection.
Exposure Immersion Splash & Spillage Fumes Acidic NR Good Good Alkaline NR Excellent Excellent Solvents NR Good Excellent Salt water Excellent Excellent Excellent Water Excellent Excellent Excellent NR=Not Recommended
Packaging & Availability
- Shipping Data
Packaging unit 2 gal. 10 gal. Part A 1 gal. 5 gal. Part B 1 gal. 5 gal. Shipping weights (approx.)
Package unit
28 lbs. 140 lbs. 1 gal. 5 gal. Reducer 1 8 lbs. 40 lbs. Reducer 2 9 lbs. 45 lbs. Flash Point: (Setaflash)
Part A 94°F Part B 108°F Reducer 1 53°F Reducer 2 113°F
Storage & Handling
- Shelf Life
2 years for both the Part A and B when stored inside at 40°F to 110°F.