Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- High load epoxy zinc primer
- Provides excellent galvanic protection
- Meets Class “B” slip co-efficient and creep resistance criteria for use on bolted connection faying surfaces
- Excellent undercutting resistance
- California VOC compliant
- Easy to topcoat
- Rapid and extended recoat windows
- Excellent adhesion to hand tool cleaned surfaces (SSPC-SP 11)
Applications & Uses
- Applications
- Application Area
- Substrates
ZincGard 1500 VOC is applied directly to properly prepared steel as the primer. Direct contact with the steel substrate is required to provide optimal galvanic protection to the underlying steel surface.
- Topcoats
ZincGard 1500 VOC is an easy to coat primer using either an epoxy or urethane. EpoxyGrip 2000 is the recommended epoxy topcoat for a two-coat application tie coat for a three coat application. MultiGrip 7000 XP VOC is recommended as a direct topcoat to ZincGard 1500 VOC.
- Pot Life
Six hours at 75° and less at higher temperatures.
Properties
- Physical Properties
- Typical Properties
- Performance Properties
Value | Units | Test Method / Conditions | |
Abrasion Resistance (1 kg Load/1000 Cycles) | Weight loss | — | — |
Adhesion | 3912.0 | psi | ASTM D 4541 |
Continuous Temperature Resistance (Dry) | 250.0 | °F | — |
Abrasion Resistance (CS 17 Wheel) | 225.0 | mg | ASTM D 4060 |
Impact Resistance (Direct Impact) | 80.0 | in-lbs. | ASTM D 2794 |
Non-Continuous Temperature Resistance (Dry) | 300.0 | °F | — |
Reducer 6 | 0.8 | lbs./gal. | — |
Reducer 8 | 0.8 | lbs./gal. | — |
Theoretical Coverage of Mixed Gallon (1 mil) | 1123.0 | sq. ft. | — |
Theoretical Volume Solids of Mixed Material | 69 - 71 | % | ASTM D 2697 |
Volatile Organic Content Unthinned | 0.8 | lbs./gal. | — |
Zinc in Dry Film | 80.0 | % | — |
Value | Units | Test Method / Conditions | |
Dry Film Thickness | 2 - 4 | mils | — |
Theoretical Coverage (3 mils) | 374.0 | sq. ft. | — |
Wet Film Thickness | 4 - 6 | mils per coat | — |
Value | Units | Test Method / Conditions | |
Salt Spray | 7200.0 | Hours | ASTM B 117 |
Regulatory & Compliance
- Qualifications
ZincGard 1500 VOC meets Class “B” requirements for slip co-efficient and creep resistance as set forth in the Specification for Structural Joints using A325 or A490 Bolts, in accordance with Research Council on Structural Connections, Appendix A. Exceed requirements of SSPC-PS 12.00
Technical Details & Test Data
- Resistance
ZincGard 1500 VOC prevents rusting of steel in a corrosive environment with a pH range of 5 to 9. Topcoats should be used for pH beyond these limits. When topcoated, ZincGard 1500 VOC effectively reduces undercutting from a damaged area. The following is a guide to the proper selection:
Exposure Immersion Splash & Spillage Fumes Acidic NR Good* Excellent* Alkaline NR Good* Excellent* Solvents NR Good* Excellent* Salt water Excellent* Excellent* Excellent* Water Excellent* Excellent* Excellent* NR=Not Recommended
*With suitable topcoat
Packaging & Availability
- Shipping Data
Packaging unit 1 gal. 5 gal. ZincGard 1500 Part A .36 gals. 1.8 gals. ZincGard 1500 Part B .36 gals 1.8 gals. ZincGard Filler 16 lbs. 80 lbs. Shipping weights (approx.)
ZincGard 1500 kit
25 lbs. 125 lbs. 1 gal. 5 gal. Reducer 6 8 lbs. 40 lbs. Reducer 8 11 lbs. 55 lbs. Flash Point: (Setaflash)
Part A 60°F Part B 80°F Reducer 6 60°F Reducer 8 109°F
Storage & Handling
- Shelf Life
6 months for the Part A and Part B and 3 years for the Zinc Filler when stored inside at 40°F to 110°F.