Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Derived from
Magnesium Glucoheptonate, Zinc Glucoheptonate, Iron Glucoheptonate, Copper Sulfate, Manganese Glucoheptonate Complex and Sodium Borate
- Guaranteed Minimum Analysis
Magnesium 3% Chelated Magnesium - 3% Iron 2% Chelated Iron - 2% Zinc 0.4% Chelated Zinc - 0.4% Manganese 0.5% Chelated Manganese - 0.5% Boron 0.25% Copper 0.12% Combined Sulfur 5.5%
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application
- Ornamental and Young Plants : Mix 2 tsp. Blueberry Micro Mix™ with 1 gallon of water. Moisten both sides of the leaves only to the point of run-off. Use misting spray bottle to apply. Use every 7-10 days or as needed.
- Agriculture : Apply 1-2 pt(s) for Row Crops to 2-3 qt(s) for High Bush Blueberries with sufficient water to cover per acre. Moisten both sides of the leaves only to the point of run-off.
- Blueberry Injection : Repeat as indicated visually or by leaf tissue test, or as part of a regular maintenance foliar feed program and can be applied up to every 10 days when using the injection feeding program.
- Compatibility
A jar compatibility test is recommended before mixing with any other product other then water in the tank to insure compatibility with foreign spray mixes and before mixing with other products other than water in the tank. Not compatible with High concentrated Calcium carbon or phosphate mixes.
- Application
Ornamental and Young Plants: Mix 2 tsp. Blueberry Micro Mix™ with 1 gal of water. Moisten both sides of the leaves only to the point of run-off. Use misting spray bottle to apply. *Use every 7-10 days or as needed.* AGRICULTURE: Apply 1-2 pt(s) for ROW CROPS to 2-3 qt(s) for High Bush Blueberries with sufficient water to cover per acre. Moisten both sides of the leaves only to the point of run-off. BLUEBERRY INJECTION: Repeat as indicated visually or by leaf tissue test, or as part of a regular maintenance foliar feed program and can be applied up to - every 10 days when using the injection feeding program.
*concentrated do not over apply.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Magnesium | 3 | % | — |
| Chelated Magnesium | 3 | % | — |
| Iron | 2 | % | — |
| Chelated Iron | 2 | % | — |
| Zinc | 0.4 | % | — |
| Chelated Zinc | 0.4 | % | — |
| Manganese | 0.5 | % | — |
| Chelated Manganese | 0.5 | % | — |
| Boron | 0.25 | % | — |
| Copper | 0.12 | % | — |
| Combined Sulfur | 5.5 | % | — |
Safety & Health
- Cautions
- Because of the nature of this product care should be taken when mixing with humic acid, phosphates and or Calcium products.
- Always do a jar compatibility test before mixing any two products other than water in your tanks.
- Cautions
Because of the nature of this product care should be taken when mixing with humic acid, phosphates and or Calcium products. Always do a jar compatibility test before mixing any two products other than water in your tanks.
- Disclaimer
It is recommended not to use this product with fungicides or pesticides. However, if applied with a fungicide or pesticide, itis the user’s responsibility to conduct a trial application on the crop(s) to be sprayed with this mix of chemicals to determine compatibility of products and compatibility with crop(s) sprayed. When mixing with other spray materials a jar compatibility test. Harmful if swallowed. Avoid contact with eyes, skin, and clothing. If on skin, wash with large amounts of soap and water. If in eyes, rinse repeatedly with clean water. If irritation persists, obtain medical attention.
*Ingestion: If patient is conscious, give large quantities of water. Do not induce vomiting. Call physician.
Storage & Handling
- Storage
Keep container sealed tightly when not in use. Do not expose to sunlight for long periods of time. Store in temperatures between 5°C (41°F) and 25°C (77°F). Dispose of Waste Material according to local, state, and Federal environmental laws and regulations.
- Storage
- Keep container sealed tightly when not in use.
- Do not expose to sunlight for long periods of time.
- Store in temperatures between 5 °C (41 °F) and 25 °C (77 °F).
- Dispose of Waste Material according to local, state, and Federal environmental laws and regulations.