Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
Suitable in outer layer for a wide range of applications requesting high optical properties.
Properties
- Film Properties (PA Monolayer - Cast Films)
Value | Units | Test Method / Conditions | |
Melting Point | 217 - 221 | °C | ISO 11357-3 |
Crystallization Temperature (Tc) | 184 - 188 | °C | ISO 11357-3 |
Glass Transition Temperature (Tg) | 52 - 56 | °C | ISO 11357-3 |
Haze | 4 - 6 | % | ASTM D-1003 |
Gloss (at 60°) | 130 - 150 | % | ASTM D-523 |
Oxygen (T=23°C, RH=0%) | 18 - 20 | ml/m2.day | ASTM D-3985 |
Water Vapor (T=40°C, RH=90%) | 110 - 130 | g/m2.day | JIS Z-0208 |
Coefficient of Friction (Static) | 0.28 - 0.32 | — | ASTM D-1894 |
Coefficient of Friction (Dynamic) | 0.28 - 0.32 | — | ASTM D-1894 |
Tensile Strength at Yield | 41 - 45 | Mpa | ISO 527-3 |
Tensile Strength at Break | 90 - 110 | Mpa | ISO 527-3 |
Tensile Elongation at Break | 370 - 390 | % | ISO 527-3 |
Tensile Modulus | 950 - 1050 | Mpa | ISO 527-3 |
Tear Load | 0.6 - 0.8 | N | ASTM D1922 |
Puncture Energy | 20 - 22 | mJ | JAS P-1019 |
Puncture Deformation | 6.5 - 7.5 | mm | JAS P-1019 |
Spencer Impact Energy | 700 - 800 | mJ | ASTM D3420 |
Flex Crack (Gelboflex) (at 23°C 1000 Cycles) | max. 50 | Holes/0,04m2 | Mil B-131C |
Flex Crack (Gelboflex) (at 5°C 100 Cycles) | max. 10 | Holes/0,04m2 | Mil B-131C |
Thermoforming Depth | max. 55 - 65 | mm | UBE METHOD |
Regulatory & Compliance
- Certifications & Compliance
- Food legislation compliance
- EC: Approved for indirect food contact & Approved for direct food contact.
- FDA: Approved for indirect food contact & Approved for direct food contact.
Technical Details & Test Data
- Notes
- Equipment: Monolayer Cast line.
- Die: Width = 350 mm; Coat hanger type.
- Structure: PA monolayer.
- Layer thickness distribution: PA = 50μm.
- Cooling conditions: Chill roll temp. = 20ºC.
- Samples conditioning and testing conditions: T =23ºC; RH = 50%.
- UBE Nylon Grades for Vacuum bags and Pouches
Grades Types Processability
(airblown)Curling
(Asym. w/o post
treatment waterbath)Optical
propertiesPuncture
resistanceHeat
resistanceFunctional UBE Nylon 1030 FDX34 Suitable Suitable Exceptional Suitable Exceptional