company tower banner
UC Coatings Company Logo
ANCHORSEAL® 2 combines our wax emulsion with natural, plant-based polymers to create a hybrid end sealer that protects freshly cut logs and lumber from damaging end checks and splits while air drying. ANCHORSEAL 2 can be used on hardwood and softwood logs and lumber to protect against costly degradation.

Product Type: Sealer, Waterborne Coating

Compatible Substrates & Surfaces: Wood

Application Method: Brush, Roller, Spray

Chemical Family: Waxes

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Labeling Claims
Features
  • Prevents up to 90% of end checks and drying splits
  • Hybrid formula combines wax with natural plant-based polymers
  • Can be applied to all species of hardwood or softwood
  • Helps prevent blue stain and sapstain caused by damaging fungi
  • Water based, non-toxic formula
  • Available in clear or more than 35 colors
  • Winterized formulas available

Applications & Uses

Application Method
Compatible Substrates & Surfaces
Applications

Surface Preparation

  • All areas to be coated should be clear of dirt and debris

Application

  • Apply ANCHORSEAL 2 using a brush, roller or sprayer until it begins to drip slightly
  • For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
  • If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
  • Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
  • If applying to the cut ends of deck boards: apply ANCHORSEAL 2 carefully with a thin brush or sponge applicator. To avoid potential staining, do not allow ANCHORSEAL 2 to get on the face of the boards.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
pH Value8 - 9
lbs/gal8
Specific Gravity0.95
Viscosity4000cps
Application Temp.10 - 32.2°C

Safety & Health

Precautions

Contains no toxic or hazardous materials

Safety Precautions

  • Wear vinyl gloves and eye protection.
  • Avoid breathing in spray. If inhaled, move to fresh air.
  • Avoid contact with eyes. If splashed into eyes, rinse with clean water for 15 minutes.
  • If skin irritation occurs, wash area with soap and water.
  • If accidentally ingested, immediately drink 2 glasses of water and contact a physician. Do not induce vomiting.
  • In case of accidental overexposure, seek medical help

Packaging & Availability

Freight Class
55
Packaging Information

Available in clear or more than 35 colors.

Packaging Sizes

  • 1 Quart Can
  • 1 Gallon Can
  • 5 Gallon Pail
  • 55 Gallon Drum
  • 275 Gallon Tote

Coverage

  • 100 sq. ft./gallon, depending on application method and wood species

Storage & Handling

Cleanup & Storage
  • Clean application equipment using hot soapy water
  • Store unused ANCHORSEAL 2 above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage