Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
Excellent mechanical properties and interlayer adhesion (especially when using the front enclosure add-on), superior esthetics, minimal warping, and reliable bed adhesion.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
Visual and functional prototyping, and short-run manufacturing
Non-suitable for Food contact and in vivo applications. Long term outdoor usage or applications where the printed part is exposed to temperatures higher than 85 °C.
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Hardness (Rockwell, Durometer) | 76 | Shore D | — |
| Tensile Modulus (1 mm/min) | 2,030 (1,618.5) | MPa | ISO 527 |
| Tensile Stress at Yield (50 mm/min) | 43.6 (39) | MPa | ISO 527 |
| Tensile Stress at Break (50 mm/min) | -33.9 | MPa | ISO 527 |
| Elongation at Yield (50 mm/min) | 0.048 (0.035) | — | ISO 527 |
| Elongation at Break (50 mm/min) | 0.34 (0.048) | — | ISO 527 |
| Flexural Strength | 70.5 | MPa | ISO 178 |
| Flexural Modulus | -2070 | MPa | ISO 178 |
| Izod Impact Strength, Notched (23°C) | -10.5 | kJ/m2 | ISO 180 |
| Charpy Impact Strength (23°C) | 58 | kJ/m2 | — |
| Value | Units | Test Method / Conditions | |
| Diameter | 2.85 ± 0.10 | mm | — |
| Max Roundness Deviation | 0.1 | mm | — |
| Net Filament Weight | 750 | g | — |
| Filament Length | ~ 107 | m | — |
| Specific Gravity | 1.1 | — | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Melt Mass-Flow Rate (260°C, 5 kg) | 41 | g/10 min | ISO 1133 |
| Vicat Softening Temperature | 97 | °C | ISO 306 |
| Melting Temperature | 225 - 245 | °C | ISO 294 |
| Value | Units | Test Method / Conditions | |
| Dissipation Factor (1 Mhz) | 0.012 | — | ASTM D150-11 |
| Dielectric constant (1 MHz) | 2.69 | — | ASTM D150-11 |
Technical Details & Test Data
- Notes
Properties reported here are average of a typical batch. The 3D printed test specimens were printed in the XY plane, using the normal quality profile in Ultimaker Cura 2.1, an Ultimaker 2+, a 0.4 mm nozzle, 90% infill, 250 °C nozzle temperature, and 70 °C. The values are the average of five white and five black specimens for the tensile, flexural, and impact tests. The Shore hardness D was measured in a 7-mm-thick square printed using the normal quality profile in Utlimaker Cura 2.5, an Ultimaker 3, a 0.4 mm print core, and 100% infill. The electrical properties were measured on a 54-mm-diameter disk with 3 mm thickness printed in the XY plane, using the fine quality profile (0.1 mm layer height) in Ultimaker Cura 3.2.1, an Ultimaker 3, a 0.4 mm print core, and 100% infill.
- Color information
Color Color code ABS Black RAL 9017 ABS White RAL 9003 ABS Red RAL 3020 ABS Blue RAL 5002 ABS Silver RAL 9006(est.) ABS Pearl Gold RAL 1036 ABS Green RAL 6018 ABS Orange RAL 2008 ABS Yellow RAL 1023 ABS Gray RAL 7011