Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- NMP-Free (NF), Low VOC (<100 g/L)
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Coating Type
- Application Types
- Interior, Exterior, Flooring, Concrete
Properties
- Appearance
- Semi-translucent, Clear after curing
- Typical Properties
- Film Properties
| Value | Units | Test Method / Conditions | |
| Total Solids | 31 - 33 | — | — |
| pH | 7.0 - 8.0 | — | — |
| Viscosity at 25°C | 500 - 1000 | cps | — |
| VOC | 45.17 | g/l | — |
| VOC (Total Weight) | 4.52 | % | — |
| Specific Gravity | 1.03 | — | — |
| Gloss at 60°C | 80 - 100 | — | — |
| Freezethaw Cycles | 0 | cycles | D2243 |
| Harmonize tariff number | 3909.50.6000 | — | — |
| Value | Units | Test Method / Conditions | |
| Tensile | 3850 | psi | D-882 |
| Tensile at 100% Elongation | 600 | psi | — |
| Elongation | 1000 | % | D-882 |
| Cold crack | below -30 | °C | ISO 17233 |
| Softening point | 130 | °C | — |
| Pencil hardness | max. 6B | h | D-3363 |
| Sward hardness | 2 | — | D-2134 |
| Uv resistance (1000 hours at 340 nm) | No damage | — | D-4587 |
| Impact resistance (Direct or Reverse) at 160 psi | N0 Damage | — | D-2794 |
| Tabor abrasion (Loss) (CS-10, 1000 cycles) | 13 | mg | D-4060 |
| Mandrel bend at 1/8 | Pass 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1 | — | D-522 |
| Dry Time | 35 | minutes | D-5895 |
| Hydrolysis resistance (200 hours, 70ºc, 95% rh) | Retained 70% of tensile properties | — | — |
| Hydrolysis resistance (200 hours, 70ºc, 95% rh) | Retained 70 | % | — |
Technical Details & Test Data
- Chemical Resistance Testing
Chemical Resistance Testing (D-1308):
- WATER: 5
- ACETIC ACID: 3
- AMMONIA: 2
- METHYL ETHYL KETONE: 1
- 2-PROPANOL: 2
- TOLUENE: 4
- GASOLINE: 5
- Various Substrate Cross-cut Adhesion
Various Substrate Cross-cut Adhesion (D-3359)
- COLD ROLL STEEL - UNPOLISHED: 5B
- ALUMINUM - UNTREATED: 5B
- BRASS - UNTREATED: 5B
- ABS - UNTREATED: 5B
- POLYCARBONATE - UNTREATED: 5B
- NYLON - UNTREATED: 5B
- HDPE - UNTREATED: 0B
Storage & Handling
- Shelf Life
- max. 12