Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Uses
- Del-Val 120 Fibered Emulsion Coating may be used on smooth surfaces BUR, SBS, APP bituminous membranes, metal surfaces, foundation walls and roll-roofing.
- It can also be used for dampproofing above and below-grade foundation walls and masonry surfaces.
- Surface Preparation
All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val Flashing Cement over damaged area then embed United Asphalt Cotton or Fiberglass Fabric.
- Product Application
Apply to a clean surface using a brush or squeegee. For best results weather should be clear with no threat of rain for 48 hours.
- Coverage
Apply at the rate of approximately 3 gallons per 100 sq.ft. Must stir coating before using.
- Cleanup
Clean tools with warm water and soap.
Properties
Regulatory & Compliance
- Regulatory & Compliance
This product meets or exceeds the requirements of ASTM D 1227-87 Type IV.
Packaging & Availability
- Packaging
Available in sizes 5gal, 55gal and 275gal.