DEL-VAL 121 NON-FIBERED EMULSION COATING - United Asphalt

Knowde Enhanced TDS

Identification & Functionality

Product Type: Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Other Paints & Coatings

Features & Benefits

Ready-to-Use Product Features: Good Surface Finish,
Good Toughness,
Water Resistant

Applications & Uses

Markets: Building & Construction
Applications: Building & Construction — Building Envelope & Roofing
Other Building Envelope & Roofing Applications
Application Method: Brush,
Spray,
Wipe
Compatible Substrates & Surfaces: Concrete,
Elastomers & Rubbers,
Metal
Uses: Del-Val 121 Non-Fibered Emulsion Coating may be used on smooth surfaces BUR, SBS, APP bituminous membranes, metal surfaces, and roll-roofing.

It can also be used for damp-proofing above and below-grade foundation walls and other masonry surfaces.
Surface Preparation: All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val 211 Flashing Cement over damaged area then embed United Asphalt Cotton or Fiberglass Fabric.
Product Application: Apply to a clean surface using a brush, squeegee, or spray equiptment. For best results weather should be clear with no threat of rain for 48 hours.
Coverage: Apply at the rate of approximately 3 gallons per 100 sq.ft. Must stir coating before using.
Cleanup: Clean tools with warm water and soap.

Properties

Regulatory & Compliance

Regulatory & Compliance: This product meets or exceeds the requirements of ASTM D 1227-87 Type III.

Packaging & Availability