Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Herbicide Target Species
- Timing And Usage Rates
TIMING
In crop:
• 2-leaf minimum, but before flag leaf is visible
• Do not harvest within 45 days of the last application
Can also be used for: pre-plant burndown, post harvest and fallow. See AUDIT 4:1 label for specific use recommendations.
CROP ROTATION
Wheat, barley and triticale may be replanted anytime after the application of AUDIT 4:1. Sugarbeets, winter rape and canola can be planted 60 days after the application of AUDIT 4:1. Any other crop may be planted 45 days after the application of AUDIT 4:1.
RATE
Wheat (including Durum), Barley
Low rate: 0.6 oz/A
High rate: 1 oz/A
Pre-plant Burndown, Post Harvest and Fallow
Low rate: 0.6 oz/A
High rate: 1 oz/A
Sequential treatments of AUDIT 4:1 Herbicide may also be made provided the total amount of AUDIT applied to the crop or during one fallow/pre-plant season does not exceed 1.8 oz/A.
TANK-MIX PARTNERS
Broadleaf Herbicide Tank-Mixes
2,4-D, MCPA; Dicamba, bromoxynil, fluroxypyr, and carfentrazone-containing products
MIXING INSTRUCTIONS
Ground Application
Do not use with spray additives that alter the pH of the spray solution below pH 6.0 as rapid product degradation can occur. This product must be completely dissolved in clean water before adding to spray tanks that do not have continuous agitation during loading and mixing. (This is common for airplanes with turbine engines.)
1. Fill the tank . to 1/3 full of water
2. While agitating, add the required amount of this product
3. Continue agitation until this product is fully dissolved, at least 5 minutes
4. Once this product is fully dissolved, maintain agitation and continue filling tank with water
5. As the tank is filling, add the other tank-mix partners and then add the required volume of spray adjuvant. Always add spray adjuvant last. Antifoaming agents may be used.
6. Dispersed tank-mix partners can settle if the tank-mixture is not continually agitated. If settling occurs, thoroughly re-agitate before using.
7. Apply this product spray mixture within 24 hours of mixing to avoid product degradation
8. If this product and a tank-mix partner are to be applied in multiple loads, fully dissolve this product in clean water prior to adding to the tank.
Properties
- Formulation Type
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging And Water Volume
PACKAGING
48 oz in one bottle
8 x 48 oz bottles per case
WATER VOLUME
5 – 20 gal/A for ground applications
2 – 5 gal/A for aerial applications