Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
- Product Families
- Active Ingredient
Octanoic acid ester of bromoxynil:
3,5-Dibromo-4-hydroxybenzonitrile........................................................................................................................................................35.17%
Fluroxypyr 1 -methylheptyl ester:
((4-Amino-3,5-dichIoro-6-fluoro-2-pyridinyl)oxy)acetic acid, I-methylheptyl ester..................................................................................13.03%
Flucarbazone-sodium:
4 , 5-Dihydro-3- methoxy-4-methyl-5-oxo-N-[[2-(trifluoromethoxy)phenyl]-1H- 1,2,4-triazole-1 -carboxamide , sodium salt..................2.59%
OTHER INGREDIENTS..........................................................................................................................................................................49.21%
TOTAL...................................................................................................................................................................................................100.00%
This formulation contains 0.25 lb of flucarbazone-sodium active ingredient per gallon (30 g ai/l).
*This product contains 24.15% 3,5-Dibromo-4-hydroxybenzonitrile (bromoxynil) or 2.34 pounds per gallon (280 OIL).
"This product contains 9.05% ((4-Amino-3,5-dichloro-6-fluoro-2-pyridinyl)oxy)acetic acid (fluroxypyr) or 0.88 pound per gallon (105 g/L).
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Herbicide Target Species
- User Safety Recommendations
User should:
- Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet.
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and change into clean clothing.
- Remove PPE immediately after handling this product. Wash the outside of gloves before removing them. As soon as possible, wash thoroughly and change into clean clothing.
- Timing And Usage Rates
CROP TIMING
Apply from 2-leaf stage up to 60 days prior to harvest. Winter wheat applications can be made in the fall or spring.
WEED TIMING
Make application to control grass weeds 1–4 leaf stage. Make application to control broadleaf weeds up to 4 inches tall.
RATE
BATALIUM has a convenient single use rate of 13.7 fl oz/A.
TANK-MIX FLEXIBILITY
Compatible with over 23 registered tank-mix partners, BATALIUM lets you customize your weed management program based on weed pressure and application conditions.- Directions For Use
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
- Mixing Instruction
Ensure the spray-tank is clean. In-line strainers and nozzle screens should be clean and 50 to 80 mesh or coarser. BATALIUM Herbicide added to water should be at a temperature atnve 500F.
1. Fill the spray-tank 1/4 to 1/2 full with clean water and begin agitation or bypass.
2.Add the appropriate rate of BATALIUM Herbicide.
3.Add any additional pesticide.
4.Add the adjuvant.
5.Add micronutrients (if needed).
6.Fill the spray-tank to the required level.
7.Maintain sufficient agitation during mixing and application of BATALIUM Herbicide.
8.For best results, apply mixed spray within 4 hours after mixing.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Technical Details & Test Data
- Technical Info
Safety & Health
- Precautionary Statements
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION: Harmful if swallowed or absorbed through skin. Causes moderate eye irritation. Avoid contact with skin, eyes, or clothing. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove and wash contaminated clothing before reuse.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Applicators and other handlers must wear:- Long-sleeved shirt and long pants;
- Chemical-resistant gloves made of any material (barrier laminate, butyl rubber 214 mils, nitrile rubber 214 mils, neoprene rubber 214 mils, natural rubber 214 mils, polyethylene, polyvinyl chloride (PVC) 214 mils, or Viton 214 mils);
- Shoes plus socks.
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE
separately from other laundry.
- Environmental Hazards
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not apply when weather conditions favor drift from areas treated. Do not contaminate water when disposing of equipment washwater or rinsate. Do not allow sprays to drift onto adjacent desirable plants.
Storage & Handling
- Storage And Disposal
Do not contaminate water, food or feed by storage or disposal.
PESTICIDE STORAGE
Do not freeze. Store in a cool (above 45°F), dry place and in such a manner as to prevent cross contamination with other pesticides, fertilizers, food, and feed.
Store in original container, keep tightly closed, and out of reach of children, preferably in a locked storage area.
PESTICIDE DISPOSAL
Pesticide wastes are toxic. Improper disposal of excess pesticide, pesticide spray or rinsate is a violation of Federal Law. If these wastes cannot be disposed
of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest
EPA Regional Office for guidance.
CONTAINER HANDLING
Rigid, Non-refillable containers small enough to shake (i.e., with capacities equal to or less than 5 gallons).
Non-refillable container. Do not reuse or refill this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Offer for recycling, if available, or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by buming. If burned, stay out of smoke. Triple rinse as follows: Empty the remaining contents into application equipment or a mix-tank and drain for 1 0 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix-tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix-tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix-tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Once container is rinsed, offer for recycling if available, or puncture and dispose of in a sanitary landfill.