Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
- Product Families
- Active Ingredients
Iprodione: 3-(3,5-dichlorophenyl)-N- (1-methylethyl)-2,4-dioxo- 1-imidazolidinecarboxamide)* 23.80% OTHER INGREDIENTS: 76.20% TOTAL: 100.00%
Features & Benefits
- Agrochemicals Features
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Direction Of Use
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Read entire label before using this product. Do not apply this product in a way that will contact workers or other persons, either directly or indirectly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval of 12 hours for ornamental uses. The restricted entry interval for all other WPS uses is 24 hours. PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil or water, is:
• Coveralls
• Chemical-resistant gloves such as barrier laminate, nitrile rubber (≥ 14 mils), neoprene rubber (≥ 14 mils), or viton (≥ 14 mils)
• Shoes plus socks
NON-AGRICULTURAL USE REQUIREMENTS The requirements in this box apply to ornamental and turf uses (golf courses, landscape and institutional areas) of this product that are NOT within the scope of the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries or greenhouses. Do not enter or allow others to enter the treated area until sprays have dried.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautionary Statements
Harmful if swallowed, absorbed through skin, or inhaled. Avoid contact with skin, eyes, or clothing. Avoid breathing spray mist.
PERSONAL PROTECTIVE EQUIPMENT (PPE) Mixers, loaders, others exposed to the concentrate, cleaners/repairers of equipment, and applicators applying as a dip treatment must wear long-sleeved shirt and long pants, chemical resistant gloves such as barrier laminate, nitrile rubber (≥ 14 mils), neoprene rubber (≥ 14 mils), or viton (≥ 14 mils), chemical-resistant apron, and chemical-resistant footwear plus socks. Applicators using hand-held equipment must wear coveralls over long-sleeved shirt and long pants, chemical- resistant gloves such as barrier laminate, nitrile rubber (≥ 14 mils), neoprene rubber (≥ 14 mils), or viton (≥ 14 mils), chemical-resistant footwear plus socks, chemical-resistant headgear for overhead exposures, and a dust/mist filtering respirator (MSHA/NIOSH approval number prefix TC-21C), or a NIOSH approved respirator with any R, P or HE filter. Applicators using aircraft or mechanical ground equipment (groundboom, airblast, etc.), and flaggers for aerial applications must wear long-sleeved shirt and long pants, and shoes plus socks. Applicators using truck-mounted equipment with a handgun at the end of a hose (i.e., for commercial turfgrass or ornamental applications) and all other handlers not specified above must wear long-sleeved shirt and long pants, chemical-resistant gloves such as barrier laminate, nitrile rubber (≥ 14 mils), neoprene rubber (≥ 14 mils), or viton (≥ 14 mils), and shoes plus socks. Follow manufacturer’s instructions for cleaning/maintaining personal protective equipment (PPE). If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing or other materials that have been drenched or heavily contaminated with this product’s concentrate. Do not reuse them.
ENGINEERING CONTROLS When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
- User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As
soon as possible, wash thoroughly and change into clean clothing.- Environmental Hazards
This chemical can contaminate surface water through aerial and ground spray applications. Under some conditions,
it may also have a high potential for runoff into surface water after application. These include poorly
draining or wet soils with readily visible slopes toward adjacent surface waters, frequently flooded areas, areas
overlaying extremely shallow ground water, areas with in-field canals or ditches that drain to surface water,
areas not separated from adjacent surface waters with vegetated filter strips, and areas overlaying tile drainage
systems that drain to surface water.
This pesticide is toxic to invertebrates. Do not apply directly to water or to areas where surface water is
present or to intertidal areas below the mean high-water mark. Drift and runoff may be hazardous to aquatic
organisms in neighboring areas. Do not contaminate water when disposing of equipment washwater or rinsate.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage And Disposal
Do not contaminate water, food, or feed by storage or disposal.
PESTICIDE STORAGE: Store only in original container.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an
approved waste disposal facility.
CONTAINER DISPOSAL:
Nonrefillable Container (five gallons or less): Nonrefillable container. Do not reuse or refill this container. Offer
for recycling, if available. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining
contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill
the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a
mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary
landfill, or incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.