Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
- Product Families
- Active Ingredients
Quinclorac: 3,7-dichloro-8-quinolinecarboxylic acid 75.00% INERT INGREDIENTS 25.00% TOTAL: 100.00%
Features & Benefits
- Agrochemicals Features
- General Information
QUINPRO herbicide may be applied postemergence to residential and nonresidential turfgrasses (refer
to Table 1) for the control of many broadleaf and grass weeds. Examples of such sites include, but
are not limited to: grounds or lawns around residential and commercial establishments, multi-family
dwellings, military and other institutions, parks, airports, road-sides, schools, picnic grounds, athletic
fields, houses of worship, cemeteries, golf courses and sod farms.
QUINPRO herbicide is absorbed by foliage and roots and translocated throughout the plant. The control
symptoms exhibited by broadleaf weeds include leaf and stem curl or twisting, and chlorosis.
Susceptible grasses demonstrate stunting, chlorosis, and gradual reddening followed by necrosis and
death. Refer to Tables 1, 2 and 3 for turfgrass tolerance and susceptible weed species.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Herbicide Target Species
- User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean
clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing.
As soon as possible, wash thoroughly and change into clean clothing.- Direction Of Use
It is a violation of federal law to use this product in a manner inconsistent with this labeling.
For use only by certified commercial applicators or persons under their direct supervision
and only for those uses covered by the certified applicator’s certification. All applicable
directions, restrictions and precautions are to be followed. This labeling must be in the
possession of the user at time of application.
DO NOT apply this product by air or through any type of irrigation equipment.
3
Albaugh, Inc. does not recommend or authorize the use of this product in manufacturing, processing
or preparing custom blends with other products for application to turf.
DO NOT apply this product in a way that will contact workers or other persons, either directly or
through drift. Only protected handlers may be in the specified area during application.
For any requirements specific to your State or tribe, consult the agency responsible for pesticide
regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard,
40 CFR part 170. This standard contains requirements for the protection of agricultural workers
on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains
requirements for training, decontamination notification, and emergency assistance. It also
contains specific instructions and exceptions pertaining to the statements on this label about
personal protective equipment (PPE), and restricted-entry interval. The requirements in this box
only apply to uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of
12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection
Standard and that involves contact with anything that has been treated, such as plants, soil, and
water, is:
• Coveralls
• Chemical-resistant gloves made of any waterproof material (such as Nitrile, Butyl, Neoprene,
and/or Barrier Laminate)
• Shoes plus socks.
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the
Worker Protection Standard for agricultural pesticides (40 CFR part 170). The WPS applies when
this product is used to produce agricultural plants on farms, nurseries, or greenhouses.
Professional applications to residential and nonresidential turf are not within the scope of the
Worker Protection Standard.
Do not enter or allow others to enter the treated area until sprays have dried.- Application Information
Apply QUINPRO herbicide to actively growing weeds as postemergence broadcast or spot sprays
using the rate, turf species and growth stage indicated in Tables 1, 2 and 3. Do not exceed the recommended
application rate or fail to comply with use restrictions listed in “General Restrictions and
Limitations”.
To achieve consistent weed control, methylated seed oil is recommended. Refer to Tables 2 and 3 for
rates.
Adding adjuvants may cause slight leaf burn, but new growth is normal and turf vigor is not reduced.
The potential for leaf burn is increased when relative humidity and temperature are high. Additional
stress from low mowing heights may also increase the possibility of turf injury. Chelated iron or
sprayable soluble nitrogen fertilizer will reduce a slight yellowing that may occur on some turfgrass
species.
Spot Applications:
Postemergence spot applications may be made to susceptible weeds in turfgrass that is tolerant to
QUINPRO herbicide (see Tables 1 and 2). Apply 0.367 ounce of QUINPRO herbicide per 1,000 square
feet of treated area. Spray coverage should be uniform and complete.
Mowing Information:
It is recommended to not mow 2 days before or after applying QUINPRO herbicide to maximize weed
control and minimize potential turf injury. Clippings from the first three mowings should be left on the
treated area.
Irrigation and Rainfall:
If soil moisture is not sufficient prior to QUINPRO herbicide application, irrigation may improve weed
control. For best results, do not water or irrigate for 24 hours after application. If rainfall does not
occur in 2 to 7 days after application, irrigation of at least one-half inch is recommended.
Extended Grass Control:
To extend grass control QUINPRO herbicide can be tank-mixed with Pendulum™ 3.3 EC, PRE-M™ 3.3
turf herbicide or Pendulum™ 60 DG to provide residual control of annual grasses. Consult the respective
tank-mix labels for additional weeds controlled.
Seeding/Overseeding/Sprigging:
The use of QUINPRO herbicide before or after seeding or overseeding a turf area will not significantly
interfere with the turfgrass seed germination and growth of those grass types identified as tolerant in
Table 1. Consult Tablet 4 for timing of applications concerning any seeding, overseeding or sprigging
situation
Properties
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautionary Statements
Harmful if swallowed or absorbed through the skin. Causes moderate eye irritation. Avoid contact
with skin, clothing, or eyes. Avoid breathing dust or spray mist. Prolonged or frequently repeated
skin contact may cause allergic reactions in some individuals.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemically resistant to this product are listed below. For more options, refer
to category A on an EPA chemical resistance category selection chart.
Applicators and other handlers must wear:
• Long-sleeved shirt and long pants
• Chemical-resistant gloves, such as butyl rubber >14 mils, or natural rubber > 14 mils, or neoprene
rubber > 14 mils, or nitrile rubber > 14 mils
• Shoes plus socks
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables,
use detergent and hot water. Keep and wash PPE separately from other laundry.
ENGINEERING CONTROLS STATEMENT
When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed
in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.- Environmental Hazards
This chemical has properties and characteristics associated with chemicals detected in groundwater.
The use of this chemical where soils are permeable, particularly where the water table is shallow, may
result in groundwater contamination.
Keep out of lakes, ponds and streams. Do not apply directly to water, areas where surface water
is present, or to intertidal areas below the mean high water mark. Do not contaminate water by
cleaning of equipment or disposal of rinsate.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage And Disposal
Do not contaminate water, food, or feed by storage or disposal.
PESTICIDE STORAGE: DO NOT store box under dampness or high humidity.
PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of onsite
or at an approved waste disposal facility.
CONTAINER DISPOSAL: Dispose of empty packaging in a sanitary landfill or by incineration, or,
if allowed by state and local authorities, by burning. If burned, stay out of smoke.