Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Product Highlights
- Helps Prevents Flame Spread and Smoke Development.
- Since 1997 homes, schools and all manner of public buildings have benefited from using Universal Fire Shield's amazing SPA-200™ formula for their paint and stain needs.
- Haunt attractions have also benefited from this same product since it will not damage styrofoam or any other decor material it is in contact with.
- The product is environmentally friendly and made in the U.S.A.
- Benefit
This product helps increase resistances to a fire hazards by enabling you to create a stronger finish and keep your paint from blistering and cracking.
Applications & Uses
- Applications
- Coating Type
- Applications & Uses
SPA-200™ can be used with any water based paint and applied anywhere you choose.
This aqueous based resin liquid coating penetrates and recommended for Interior and Exterior usage.
Cabinets, doors, sheet rock, window frames, siding, wood and paper boxes, paper fiber containers, flooring, paneling, siding, and many others.
APPLICATION:
An excellent fire retardant paint additive for all brands of water based paints and coatings. It can be mixed with most all brands of paints and coatings. Mix in 14 - 16 oz. of Additive to 1 Gallon of Paint (see directions). Additive may cause paints to thicken. Add water if necessary to get proper consistency. Allow to dry between coats. Mix in thoroughly. These products give a clear retardant protection within the paints. 1 Gallon treats up to 8 gallons of Paint.
UNISHIELDS COATINGS WITH FIRE RETARDANT ADDITIVES CREATES A THERMAL COATING:
Average coverage of treatment is 250-300 sq. ft. per US gallon. Apply with a sprayer, brush or roller. The material surface must be clean. Cover entire surface and allow to dry. A two coat application is recommended, treat both sides when possible. Some materials will take more or less depending on the type and blend of materials. If a third application is needed do so. The more you layer the retardant the better it will resist flames. Remember paints and stains with flame retardant additives provide additional flame resistance as part of a system help pass fire safety codes. Used on wood with other flame resistant products such as Fire Kote 100™ or Wood Shield W-1000™ provides a system that is a complete superior fire resistant treatment.
Properties
- Soluble in
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Total Solids | 7.15 | % | - |
Density | 9.1 | lbs/gallon | - |
Specific Gravity | 1.1 | - | - |
pH Factor | 6.4 | - | - |
Flash Point | 0.0 | °C | - |
Boric Acid | 2.6 | Weight % | - |
Sodium Bromide | 4.5 | Weight % | - |
Surfactant | 0.05 | Weight % | - |
Boiling Point | 212.0 | °C | - |
Regulatory & Compliance
- Compliance
Meets ASTM E-84 & UL 263 standards.
Technical Details & Test Data
- Product Specification & Technical Data
Classified Fire Rating: CLASS A, Flame Spread = 25, Smoke Dev. = 110
Classified Fire Rating: CLASS B, Flame Spread = 35, Smoke Dev. = 120
Packaging & Availability
- Packaging Type
- Availability
- 1 gallon containers
- 5 gallon containers
- 55 gallon drums