Solplast

Uteksol Brand

Supplier:Uteksol

Products:994

SOLPLAST® is a range of thermoplastic elastomer compounds based on styrene block copolymers such as SBS, SEBS and SEEPS, a so-called TPE-S product. These compounds have rubber-like properties, yet flow like thermoplastics when exposed to heat and pressure. TPE-S based products are characterized by low compression set and good resistance to various media. Special types with adhesion properties to various thermoplastics complement the portfolio.

View All Solplast Products

Solplast™ TH 65A7004 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:860.0 - 860.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 70A UTEKSOL 75

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:34.0 - 34.0 kN/m
Strain at Break:640.0 - 640.0 %
Compression Set (70 °C):92.0 - 92.0 %

Solplast™ TH 60A9000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:22.0 - 22.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):83.0 - 83.0 %

Solplast™ TH 80A9000 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:820.0 - 820.0 %
Compression Set (70 °C):43.0 - 43.0 %

Solplast™ TH 80A9000 A0 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 75A UTEKSOL 44

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:22.0 - 22.0 kN/m
Strain at Break:710.0 - 710.0 %
Compression Set (70 °C):50.0 - 50.0 %

Solplast™ TH 90A7000 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:33.0 - 33.0 kN/m
Strain at Break:440.0 - 440.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 90A7000 A0 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 35A8000 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:14.0 - 14.0 kN/m
Strain at Break:710.0 - 710.0 %
Compression Set (70 °C):59.0 - 59.0 %

Solplast™ TH 60A7000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:24.0 - 24.0 kN/m
Strain at Break:450.0 - 450.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 65A UTEKSOL 60

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:860.0 - 860.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 70A UTEKSOL 92

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:20.0 - 20.0 kN/m
Strain at Break:850.0 - 850.0 %
Compression Set (70 °C):35.0 - 35.0 %

Solplast™ TH 45A8900 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:18.0 - 18.0 kN/m
Strain at Break:640.0 - 640.0 %
Compression Set (70 °C):61.0 - 61.0 %

Solplast™ TH 90A9900 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:32.0 - 32.0 kN/m
Strain at Break:730.0 - 730.0 %
Compression Set (70 °C):55.0 - 55.0 %

Solplast™ TH 90A9900 A1 by Uteksol is commonly used as Molding Resin for a variety of applications.

Knowde Brand Summary

Identification

Chemical Family: Styrenics
Polymer Name: Styrenic Thermoplastic Elastomer,
Thermoplastic Vulcanizate (TPV)
Technologies: Elastomers
Product Families: Thermoplastic Elastomers
Styrenic Thermoplastic Elastomers (TPE-S),
Thermoplastic Vulcanizates (TPV)

Applications & Uses

Plastics & Elastomers Processing Methods: Extrusion,
Injection Molding