Products

Uteksol

ElastomersProduct Families

Thermoplastic Elastomers

734 Products found on Uteksol in Elastomers

Solplast™ TH 35A8000 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:14.0 - 14.0 kN/m
Strain at Break:710.0 - 710.0 %
Compression Set (70 °C):59.0 - 59.0 %

Solplast™ TH 65A7004 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:860.0 - 860.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 80A9000 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:820.0 - 820.0 %
Compression Set (70 °C):43.0 - 43.0 %

Solplast™ TH 80A9000 A0 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 45A8900 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:18.0 - 18.0 kN/m
Strain at Break:640.0 - 640.0 %
Compression Set (70 °C):61.0 - 61.0 %

Solplast™ TH 90A UTEKSOL 70

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:35.0 - 35.0 kN/m
Strain at Break:790.0 - 790.0 %
Compression Set (70 °C):55.0 - 55.0 %

Solplast™ TH 75A9000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:28.0 - 28.0 kN/m
Strain at Break:520.0 - 520.0 %
Compression Set (70 °C):86.0 - 86.0 %

Solplast™ TH 90A7000 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:33.0 - 33.0 kN/m
Strain at Break:440.0 - 440.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 90A7000 A0 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 70A UTEKSOL 75

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:34.0 - 34.0 kN/m
Strain at Break:640.0 - 640.0 %
Compression Set (70 °C):92.0 - 92.0 %

Solplast™ TH 90A9900 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:32.0 - 32.0 kN/m
Strain at Break:730.0 - 730.0 %
Compression Set (70 °C):55.0 - 55.0 %

Solplast™ TH 90A9900 A1 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 75A UTEKSOL 44

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:22.0 - 22.0 kN/m
Strain at Break:710.0 - 710.0 %
Compression Set (70 °C):50.0 - 50.0 %

Solplast™ TV 70A10900 A

Polymer Name:Thermoplastic Vulcanizate (TPV)
Processing Methods:Injection Molding
Density:960.0 - 960.0 kg/m³
Tear Strength:25.0 - 25.0 kN/m
Compression Set (70 °C):33.0 - 33.0 %

Solplast™ TH 60A9000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:22.0 - 22.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):83.0 - 83.0 %

Solplast™ TH 65A UTEKSOL 60

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:860.0 - 860.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 10A UTEKSOL 106

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):24.0 - 24.0 %

Solplast™ TV 85A10000 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:35.0 - 35.0 kN/m
Strain at Break:430.0 - 430.0 %
Compression Set (70 °C):40.0 - 40.0 %

Solplast™ TH 55A9900 A2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:18.0 - 18.0 kN/m
Strain at Break:810.0 - 810.0 %
Compression Set (70 °C):39.0 - 39.0 %

Solplast™ TH 25A UTEKSOL 94

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:900.0 - 900.0 %
Compression Set (70 °C):65.0 - 65.0 %

Solplast™ TH 40A8000 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:17.0 - 17.0 kN/m
Strain at Break:660.0 - 660.0 %
Compression Set (70 °C):60.0 - 60.0 %

Solplast™ TH 65A7000 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:26.0 - 26.0 kN/m
Strain at Break:530.0 - 530.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 45A9000 B1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:15.0 - 15.0 kN/m
Strain at Break:870.0 - 870.0 %
Compression Set (70 °C):26.0 - 26.0 %

Solplast™ TV 68A10001 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:25.0 - 25.0 kN/m
Strain at Break:450.0 - 450.0 %
Compression Set (70 °C):35.0 - 35.0 %

Solplast™ TH 60A9000 D0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:21.0 - 21.0 kN/m
Strain at Break:530.0 - 530.0 %
Compression Set (70 °C):82.0 - 82.0 %

Solplast™ TH 25A7000 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:560.0 - 560.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 85A9900 D1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:31.0 - 31.0 kN/m
Strain at Break:480.0 - 480.0 %
Compression Set (70 °C):89.0 - 89.0 %

Solplast™ TH 50A9000 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:21.0 - 21.0 kN/m
Strain at Break:900.0 - 900.0 %
Compression Set (70 °C):32.0 - 32.0 %

Solplast™ TH 50A9000 A1 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 45A8000 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:18.0 - 18.0 kN/m
Strain at Break:640.0 - 640.0 %
Compression Set (70 °C):61.0 - 61.0 %

Solplast™ TH 15A9000 B1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:11.0 - 11.0 kN/m
Strain at Break:910.0 - 910.0 %
Compression Set (70 °C):23.0 - 23.0 %

Solplast™ TH 50D9000 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:70.0 - 70.0 kN/m
Strain at Break:610.0 - 610.0 %
Compression Set (70 °C):68.0 - 68.0 %

Solplast™ TH 90A9000 A2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:39.0 - 39.0 kN/m
Strain at Break:670.0 - 670.0 %
Compression Set (70 °C):57.0 - 57.0 %

Solplast™ TH 90A9000 A2 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 30A9000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.5 - 12.5 kN/m
Strain at Break:630.0 - 630.0 %
Compression Set (70 °C):79.0 - 79.0 %

Solplast™ TH 35A9000 D1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:620.0 - 620.0 %
Compression Set (70 °C):80.0 - 80.0 %

Solplast™ TH 60A9020 B1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:27.0 - 27.0 kN/m
Strain at Break:850.0 - 850.0 %
Compression Set (70 °C):33.0 - 33.0 %

Solplast™ TH 20A8900 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:14.0 - 14.0 kN/m
Strain at Break:720.0 - 720.0 %
Compression Set (70 °C):55.0 - 55.0 %

Solplast™ TH 80A9000 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:30.0 - 30.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):85.0 - 85.0 %

Solplast™ TH 80A9000 B by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 90A9113 B1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:35.0 - 35.0 kN/m
Strain at Break:790.0 - 790.0 %
Compression Set (70 °C):40.0 - 40.0 %

Solplast™ TH 65A9900 D0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:23.0 - 23.0 kN/m
Strain at Break:510.0 - 510.0 %
Compression Set (70 °C):81.0 - 81.0 %

Show

of 734 results