Products

Uteksol

956 Products found on Uteksol in Styrenic Thermoplastic Elastomers (TPE-S)

Solplast™ TH 60A7000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:24.0 - 24.0 kN/m
Strain at Break:450.0 - 450.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 70A UTEKSOL 92

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:20.0 - 20.0 kN/m
Strain at Break:850.0 - 850.0 %
Compression Set (70 °C):35.0 - 35.0 %

Solplast™ TH 35A8000 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:14.0 - 14.0 kN/m
Strain at Break:710.0 - 710.0 %
Compression Set (70 °C):59.0 - 59.0 %

Solplast™ TH 75A UTEKSOL 44

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:22.0 - 22.0 kN/m
Strain at Break:710.0 - 710.0 %
Compression Set (70 °C):50.0 - 50.0 %

Solplast™ TH 70A UTEKSOL 75

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:34.0 - 34.0 kN/m
Strain at Break:640.0 - 640.0 %
Compression Set (70 °C):92.0 - 92.0 %

Solplast™ TH 65A UTEKSOL 60

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:860.0 - 860.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 75A9000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:28.0 - 28.0 kN/m
Strain at Break:520.0 - 520.0 %
Compression Set (70 °C):86.0 - 86.0 %

Solplast™ TH 90A UTEKSOL 70

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:35.0 - 35.0 kN/m
Strain at Break:790.0 - 790.0 %
Compression Set (70 °C):55.0 - 55.0 %

Solplast™ TH 90A7000 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:33.0 - 33.0 kN/m
Strain at Break:440.0 - 440.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 90A7000 A0 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 45A8900 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:18.0 - 18.0 kN/m
Strain at Break:640.0 - 640.0 %
Compression Set (70 °C):61.0 - 61.0 %

Solplast™ TH 80A9000 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:820.0 - 820.0 %
Compression Set (70 °C):43.0 - 43.0 %

Solplast™ TH 80A9000 A0 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 65A7004 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:860.0 - 860.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 90A9900 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:32.0 - 32.0 kN/m
Strain at Break:730.0 - 730.0 %
Compression Set (70 °C):55.0 - 55.0 %

Solplast™ TH 90A9900 A1 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 90A9900 B2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:45.0 - 45.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):38.0 - 38.0 %

Solplast™ TH 60A9000 D

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:22.0 - 22.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):83.0 - 83.0 %

Solplast™ TH 10A UTEKSOL 106

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):24.0 - 24.0 %

Solplast™ TH 63A9822 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:25.0 - 25.0 kN/m
Strain at Break:790.0 - 790.0 %
Compression Set (70 °C):55.0 - 55.0 %

Solplast™ TH 55A9000 C

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:22.0 - 22.0 kN/m
Strain at Break:900.0 - 900.0 %
Compression Set (70 °C):35.0 - 35.0 %

Solplast™ TH 45A9021 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:19.0 - 19.0 kN/m
Strain at Break:920.0 - 920.0 %
Compression Set (70 °C):36.0 - 36.0 %

Solplast™ TH 80A9000 C1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:30.0 - 30.0 kN/m
Strain at Break:770.0 - 770.0 %
Compression Set (70 °C):44.0 - 44.0 %

Solplast™ TH 20A7000 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:580.0 - 580.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 40D7000 A1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:58.0 - 58.0 kN/m
Strain at Break:520.0 - 520.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 40A9000 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:900.0 - 900.0 %
Compression Set (70 °C):85.0 - 85.0 %

Solplast™ TH 40A9000 B by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 45D9000 C0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:82.0 - 82.0 kN/m
Strain at Break:770.0 - 770.0 %
Compression Set (70 °C):61.0 - 61.0 %

Solplast™ TH 55A9000 B

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:17.0 - 17.0 kN/m
Strain at Break:840.0 - 840.0 %
Compression Set (70 °C):85.0 - 85.0 %

Solplast™ TH 80A7000 D1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Tear Strength:25.0 - 25.0 kN/m
Strain at Break:350.0 - 350.0 %
Compression Set (70 °C):90.0 - 90.0 %

Solplast™ TH 90A9000 C

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:34.0 - 34.0 kN/m
Strain at Break:760.0 - 760.0 %
Compression Set (70 °C):44.0 - 44.0 %

Solplast™ TH 30A9000 B2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:12.0 - 12.0 kN/m
Strain at Break:920.0 - 920.0 %
Compression Set (70 °C):26.0 - 26.0 %

Solplast™ TH 80A9900 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:29.0 - 29.0 kN/m
Strain at Break:820.0 - 820.0 %
Compression Set (70 °C):43.0 - 43.0 %

Solplast™ TH 80A9900 A0 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 45A9900 B2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:14.0 - 14.0 kN/m
Strain at Break:890.0 - 890.0 %
Compression Set (70 °C):29.0 - 29.0 %

Solplast™ TH 40A9000 C2

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion
Tear Strength:17.0 - 17.0 kN/m
Strain at Break:890.0 - 890.0 %
Compression Set (70 °C):35.0 - 35.0 %

Solplast™ TH 50A9000 A

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:19.0 - 19.0 kN/m
Strain at Break:900.0 - 900.0 %
Compression Set (70 °C):32.0 - 32.0 %

Solplast™ TH 50A9000 A by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 52A UTEKSOL 74

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:16.0 - 16.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):41.0 - 41.0 %

Solplast™ TH 40A9900 B1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:14.0 - 14.0 kN/m
Strain at Break:880.0 - 880.0 %
Compression Set (70 °C):26.0 - 26.0 %

Solplast™ TH 40A9900 B1 by Uteksol is commonly used as Molding Resin for a variety of applications.

Solplast™ TH 55A9901 D1

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:19.0 - 19.0 kN/m
Strain at Break:560.0 - 560.0 %
Compression Set (70 °C):86.0 - 86.0 %

Solplast™ TH 66A8017 A0

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding
Tear Strength:30.0 - 30.0 kN/m
Strain at Break:670.0 - 670.0 %
Compression Set (70 °C):89.0 - 89.0 %

Show

of 956 results