Products

Good stiffness & Impact strength.

Uz-Kor Gas Chemical BL6200- is a HDPE resin produced via Slurry process technology and suitable for use in blow molding application. BL6200 is designed to offer high speed processability, good ESCR.

MF5000 is manufactured to be processed in flat yarn for tarpaulin by CSTR Slurry process technology. MF5000 is ideally suited for use in monofilament application. MF5000 offers good stretching, spinning, high strength property and melting stability.

FC-550 is a controlled medium modified propylene random copolymer for manufacturing high transparent cast films. The product contains slip and anti-block agents. It offers good process ability, excellent clarity and gloss and the resin is specifically designed not to discolor and to provide excellent film optical properties. It is also suitable for production of stationary folders. FC-550 is suitable for food contact.

J-370 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-370 shows high melt flow and good balance of impact resistance and strength. It has broad range of property, and is used from general supplies to automotive compound base resin.

Y-120 is a propylene homo polymer designed for stretched products such as flat yarn It is a low flow rate resin with a broad molecular weight distribution. It complies with FDA regulation.

B-320 is impact block copolymer which has ethylene-propylene rubber inside homo polypropylene. This grade can be processed by sheet extrusion. B-320 shows good impact resistance at low temperature and has also high strength. It has good vacuum molding property, suitable for the production of vacuum molding goods. B-320 is applied to food packaging tray, various industrial sheets.

FR-170H is a high melt flow rate resin with a narrow molecular weight distribution homo polymer. It is ideally suited for woven & nonwoven application including staple fiber as well as continuous filament yarn and high tenacity fiber. This product contains no peroxide or peroxide decomposition by-products. It is formulated with an anti-gas fading stabilization package

B-520 is random copolymer polypropylene for extrusion and blow molding application with good transparency and good gloss for transparent bottle. This grade can be processed by extrusion, injection blow molding and sheet extrusion. B-520 offers high clarity, flexible stiffness, high heat distortion temperature and chemical resistance. This grade is suitable for food contact. B-520 is a ‘Phthalate-Free’ product.

High stiffness, Good chemical resistance.

J-170T is homo polymer resin produced through the polymerization of propylene. This grade is designed to be processed in conventional Injection molding equipment. J-170T shows good thermal stability and high melt-flow. It is typically used in production of housewares, the transparency stationery and disposable syringes.

JM-370 is high impact block copolymer which has more ethylene contents than normal block copolymer. This grade is designed to be processed in conventional Injection molding equipment. JM-370 shows better impact resistance than normal block copolymer and has good physical property balance.

FO-130A is homo polymer resin produced by the polymerization of propylene. This grade is designed to be processed in metallizing BOPP film applications. This grade shows good gloss and transparence properties.

FL7000 – is manufactured to be processed in conventional blown film equipment by CSTR Slurry technology. Thanks to Bi-modal design of molecular composition, FL7000 offers both excellent processability and superior mechanical properties.

JI-350 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. JI-350 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

J-570S is a nucleated random copolymer for injection molding applications. This grade is designed to be processed in conventional injection molding equipment and offers high transparency, good stiffness/impact strength balance, high gloss, good flow and low smell. J-570S is a ‘Phthalate-Free’ product.

J-350 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-350 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

Y-130 is a propylene homo polymer designed for stretched products such as flat yarn. It is a low flow rate resin with a broad molecular weight distribution It complies with FDA regulation.

FR-160 is a medium melt flow rate resin with a narrow molecular weight distribution homo polymer. It is ideally suited for woven & nonwoven application including staple fiber as well as continuous filament yarn and high tenacity fiber. This product contains no peroxide or peroxide decomposition by-products. It is formulated with an anti-gas fading stabilization package

B-310 is impact block copolymer which has ethylene-propylene rubber inside homo polypropylene. This grade can be processed by sheet extrusion. B-310 shows good impact resistance at low temperature and has also high strength. It has good vacuum molding property, suitable for the production of vacuum molding goods. B-310 is applied to food packaging tray, various industrial sheets.

J-320 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-320 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

J-560S is a nucleated random copolymer for injection molding applications. This grade is designed to be processed in conventional injection molding equipment and offers super excellent transparency, good stiffness/impact strength balance, high gloss, high hinge property and low smell. J-560S is a ‘Phthalate-Free’ product.

Smooth surface, Good ESCR, Anti-static

L-270A is the polypropylene Copolymer manufactured by under the Spheripol process. This grade is designed to potential end use applications include Extrusion coating on Woven and Kraft paper. Low neck-in, High speed process ability, Good adhesive property to paper and Kraft paper, Oil & moisture permeation resistance.

J-160 is homo polymer resin produced through the polymerization of propylene. This grade is designed to be processed in conventional Injection molding equipment. J-160 shows good thermal stability and has high strength and stiffness. It is typically used in production of housewares and the general supplies.

J-360 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-360 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

JM-380 is high impact block copolymer which has more ethylene contents than normal block copolymer. This grade is designed to be processed in conventional Injection molding equipment. JM-380 shows Ultra high melt flow, controlled rheology and has medium impact resistance and high strength and stiffness. This grade is appropriate for energy saving and multi-cavity injection molding.

FL7000 – is manufactured to be processed in conventional blown film equipment by CSTR Slurry technology. Thanks to Bi-modal design of molecular composition, FL7000 offers both excellent processability and superior mechanical properties.

J-330 is impact block copolymer which has ethylene-propylene rubber inside homo polypropylene. This grade can be processed by conventional Injection molding. J-330 shows good balance of strength and impact resistance. It is used from industrial supplies to automotive compound base resin.

ISO PE-100 Class, Good ESCR.

UGCC Random Polypropylene (Injection grade)

J-150 is homo polymer resin produced through the polymerization of propylene. This grade is designed to be processed in conventional Injection molding equipment. J-150 shows good thermal stability and has high strength and stiffness. It is typically used in production of housewares and the general supplies.