Ageless Cream with Lipolight® OAP/PVA
Formulation
| Name | Ingredient | Supplier | % |
|---|---|---|---|
| Phase A | |||
Deionized Water Water | Water | — | 69.92 |
Disodium EDTA (119) Disodium EDTA | Disodium EDTA | — | 0.10 |
PemulenTM TR-1 (9) Acrylates/C10-30 alkyl acrylate crosspolymer | Acrylates/C10-30 alkyl acrylate crosspolymer | — | 0.10 |
| Phase C | |||
Liponate® SPS Veg (1) Cetyl Esters | Cetyl Esters | — | 2.00 |
Lipomulse® Luxe (1) Cetearyl Alcohol (and) Glyceryl Stearate (and) PEG-40 Stearate (and) Ceteareth-20 | Cetearyl Alcohol (and) Glyceryl Stearate (and) PEG-40 Stearate (and) Ceteareth-20 | — | 6.00 |
Lipocol® SC (1) Cetearyl Alcohol | Cetearyl Alcohol | — | 1.50 |
Liponate® NPGC-2 (1) Neopentyl Glycol Dicaprylate/Dicaprate | Neopentyl Glycol Dicaprylate/Dicaprate | — | 5.00 |
Liponate® GC (1) Caprylic/Capric Triglyceride | Caprylic/Capric Triglyceride | — | 3.00 |
Liponate® NEB (1) C12-15 Alkyl Benzoate | C12-15 Alkyl Benzoate | — | 4.00 |
Liponate® TDTM (1) Tridecyl Trimellitate | Tridecyl Trimellitate | — | 2.00 |
| Phase B | |||
Liponic® EG-1 (1) Glycereth-26 | Glycereth-26 | — | 3.00 |
Xanthan Gum (119) Xanthan Gum | Xanthan Gum | — | 0.15 |
| Phase E | |||
LipoLight® OAP/PVA (1) Nylon-12 Fluorescent Brightener 230 Salt (and) Polyvinylalcohol Crosspolymer | Nylon-12 Fluorescent Brightener 230 Salt (and) Polyvinylalcohol Crosspolymer | — | 3.00 |
| Phase D | |||
Sodium Hydroxide 18% Sol.(119) Sodium Hydroxide | Sodium Hydroxide | — | 0.23 |
| Phase F | |||
Preservative Preservative | Preservative | — | qs |
Preparation:
PROCEDURE:
1. Mix Sequence #1 ingredients at 80?C with medium speed propeller stirring until dispersed.
2. Add Sequence #2 ingredients to main vessel with propeller mixing, heat to 80°C.
3. Heat Sequence #3 to 80°C, then add to Sequence #1 under propeller mixer. Mix for 15 minutes or until the emulsification is completed.
4. Remove from heat and add Sequence #4 to main vessel, batch will thicken slightly.
5. When batch is below 60°C add Sequence #5, and #6 with mixing and continue cooling.
6. Shutdown mixing when batch reaches 32°C.
Notes:
SPECIFICATIONS:
pH: 6.5 ± 0.2
Viscosity: TF at 3 rpm (Helipath:ON) = 458,900 cps ± 10%
Stability: 30 days at 50°C
(1) Lipo Chemicals, Inc.
(9) Lubrizol
(119) Ruger Chemical Co., Inc.
- Markets
- Applications
- Application Format
- Skin Care Applications
Message Our Experts For a Fast Response
View All Experts
