Line Eraser Gel with Lipolight® OAP/PVA

Preparation: 1. Mix the water from Sequence #1 with high speed propeller agitation. Slowly sprinkle in the remaining Sequence #1 ingredient, mix until clear. 2. Add Sequence #2 ingredients to Sequence #1 and keep mixing speed on high. 3. Slowly sprinkle in Sequence #3 ingredient with high speed propeller mixing. Mix until free of any lumps and batch is homogeneous. Mixing speed can now be reduced and Sequence #4 ingredient added with mixing. 4. Heat the batch to 75ºC with medium speed propeller mixing. Once batch is at 75ºC and uniform, then the batch can be slowly cooled to 60ºC. 5. Add Sequence #5 to batch. Batch will thicken and continue mixing until clear and uniform. 6. Continue slow cooling of batch and add Sequence #6 with mixing. 7. At 35ºC, add premixed Sequence #7 ingredients to batch with mixing. 8. Add Sequence #8 ingredient to batch, mix until dispersed completely. 9. Add premixed Sequence #9 slurry, that was mixed with high speed propeller agitation, to the batch and mix until completely dispersed. Batch will turn white color. 10. If necessary, adjust pH to within specification using Sequence #10.