Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Cleaning Ingredients Functions
- Ionic Character
- Anionic
- Technologies
Applications & Uses
- Markets
- Applications
- Recommended Applications
The product can be used in the following applicatios: low foam caustic and/or alkaline cleaners, mechanical dishwashing detergents, metal cleaners, alkaline plating baths, laundry detergents, steam cleaners, food plant cleaners, hard surface cleaners,paints and coatings, textile scouring, oven cleaners, cip cleaners and synthetic coolants
Properties
- Appearance
- Clear
- Typical Properties
- Typical Properties
- Excellent caustic and alkaline electrolyte stability
- Low foam
- Excellent surface tension reduction and fast wetting properties
- Hydrotrope for nonionics in highly alkaline systems
- May eliminate the need for hydrotropes or other surfactants in alkaline systems
- Good detergency
- All are approved for use as Inerts in non-food pesticide formulations
Value | Units | Test Method / Conditions | |
Color | max. 1 | Gardner | — |
Density (25°C) | 1.06 | g/cc | — |
Solid Content | 50.0+/-1.5 | % | — |
pH Value (5% in DI Water) | 7 - 9 | — | — |
Technical Details & Test Data
- Product Efficacy Studies
APPLICATION DATA - DeTERGE LF-28 at 25°C:
Table 1 shows the stability of DeTERGE LF surfactants at 3 – 5% by weight after storage in caustic and alkaline electrolyte solutions. The data reflects the minimum number of days that the products remained clear and stable.
Table 1. Days Stable in Caustic and Electrolytes at 25°C:
Table 2. Cloud Points at 1% by Weight in ºC:
Table 3. Draves Wetting at 25°C (in seconds) at 1% by Weight:
Table 4. Foam Heights* (in mls) at 1% by Weight:
* Determined via modified Ross-Miles graduated cylinder shake test.
Dynamic Surface Tension:
Dynamic surface tension of the DeTERGE LF series was determined with a SensaDyne QC6000 Surface Tensiometer. The products were tested at 1% by weight in deionized water at ambient temperature.