Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Cleaning Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- HII Features
- Product Characteristics
- Excellent hydrotrope
- Chlorine stable (up to 5% active NaOCl)
- Excellent solubilizer for nonionics in alkaline and electrolyte systems
- Excellent alkali and electrolyte stability
- Contributes wetting properties
- Approved for use as inert in non-food pesticide formulations
- Readily Biodegradable
- Non-phenolic
- Practically non-foaming
- Provides corrosion inhibition on steel
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Recommended Uses
- Alkaline cleaners & detergents
- Low foam alkaline systems
- High pressure alkaline spray wash
- Chlorine based cleaners
- Automatic dish liquids & detergents
- High pressure metal cleaner
- Low foam spray vac detergents
- Low foam metal cleaners
- Textile mercerizing
- Industrial detergents
- Pesticide formulations
Properties
- Appearance
- Clear water white liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
pH Value | 9 - 11 | — | — |
Active Content | 45.0+/-1.5 | % | — |
Color | max. 1 | Gardner | — |
Density (25°C) | 1.05 | g/cc | — |
Technical Details & Test Data
- Product Efficacy Studies
-
Foam Height Properties of DeTROPE SA-45:
The foaming properties of DeTROPE SA-45 were determined via modified Ross-Miles, graduated cylinder shake test. The foam heights are presented in the following charts compared to sodium xylene sulfonate (SXS-40) and are reported as millimeters of foam present initially, at 30 seconds, at 60 seconds and after 2 minutes.
-
Hydrotrope Cloud Point Properties of DeTROPE SA-45 (continued):
To determine hydrotroping capabilities, a series of cloud point tests were performed. The hydrotrope was solubilized in caustic or alkaline electrolyte solution to which a 9.5 mole nonyl phenol was added. Each sample was heated to the temperature at which the NPE-9.5 clouds out of solution. The higher the cloud point temperature, the more efficient the hydrotrope. The control is 1% NPE-9.5 in each alkaline electrolyte solution without hydrotrope added. The hydrotroping capabilities of DeTROPE SA-45 at higher levels of NP-9.5 show similar trends (data available on request).
Key:
- NaOH = Sodium Hydroxide
- SMP = Sodium Metasilicate Pentahydrate
- TKPP = Tetrapotassium Pyrophosphate
- SXS-40 = Sodium Xylene Sulfonate 40% active
-
Dynamic Surface Tension of DeTROPE SA-45:
Dynamic surface tension was conducted at 1.0% and 2.0% by weight in distilled water at ambient temperature. DeTROPE SA-45 provides considerably lower surface tension as compared to SXS-40.
-
Corrosion Inhibition Properties of DeTROPE SA-45:
Metal coupons were partially submerged in a solution containing from 0.25% - 1.0% by weight of DeTROPE SA-45 in hard water (100ppm as CaCO3 and 71ppm as CaCl2) and stored in sealed glass jars at room temperature. The top halves of the panels were exposed to the vapor phase.
- 90 Day Results:
Steel Panels: Q-Panel – Type RS Low carbon, cold-rolled steel 0.063” thick, ½ hard.
-