Brands

VF-20™ is a versatile two-component urethane based primer designed for a variety of substrates. It’s unique formulation allows for dilution with acetone by 33-50% for improved penetration, coverage, and adhesion. VF-20 may be applied at temperatures greater than 0˚ F by airless sprayer, roller, squeegee, or broom. VF-20 may be used with all VersaFlex rapid curing sealants and coatings for interior and exterior application. VF-20 has been designed along with VF-15 to offer versatility and flexibility in primer selection. VF-20 is ideal for use when longer working time is needed. While VF-20 will cure down to 0˚ F it is ideal at temperatures above 75˚ F. VF-15 is typically preferred at temperatures between 40—75˚ F or at elevated temperatures when a faster re-coat is required such as smaller projects or where quick return to service is needed.

VF-15™ is a versatile two-component urethane based primer designed for a variety of substrates. It’s unique formulation allows for dilution with acetone by 33-50% for improved penetration, coverage, and adhesion. VF-15 may be applied at temperatures greater than 0˚ F by airless sprayer, roller, squeegee, or broom. VF-15 may be used with all VersaFlex rapid curing sealants and coatings for interior and exterior application. VF-15 has been designed along with VF-20™ to offer versatility and flexibility in primer selection. VF-15 will cure to 0°F is typically preferred at temperatures between 40—75°F or at elevated temperatures when a faster re-coat is required such as smaller projects or where quick return to service is needed. VF-20 is ideal for use when longer working time is needed.

VersaFlex PW-1 is a specially formulated, low solids, single component primer designed for steel and metal. Its low viscosity contributes to ease of application and adheres well for top coating with VersaFlex polyurea products. PW-1 primer may be used with all VersaFlex rapid curing polyurea sealants and spray coating systems. It is designed for use in both interior and exterior priming situations. PW-1 is ideal for priming metal surfaces to help temporarily hold back flash rust.

VersaFlex VF 30 is a low viscosity, high solids epoxy developed as a penetrating concrete primer for polyurea applications. VF 30 penetrates and strengthens the surface of the concrete, reduces pin-hole formations and provides a chemically reactive surface to accept VersaFlex polyurea systems. Adhesion is increased with the use of VF 30 by up to three times that of unprimed concrete.