Brands

VF 280 is a fast set, rapid curing, pure elastomeric polyurea protective coating for industrial applications requiring a flexible coating or lining for waterproofing or secondary containment. This protective membrane can be applied to geotextile fabric, concrete and steel substrates. VF 280 is a volatile free, odorless system proportioned at a 1:1 mix ratio with plural component spray equipment. VF 280 may be applied at varying thicknesses in a single application using a multi-pass spray technique.

VersaFlex AroStruct is a fast set, rapid curing, 100% solids, semi-structural, two-component performance modified polyurea spray coating/lining material. Its fast gel time makes it suitable for applications down to -20°F without special conditioning of the component resins and isocyanates. AroStruct produces an extremely tough rigid film at all thicknesses.

VersaFlex VF 330 is a 100% solid, fast setting, plural component, polyurea elastomer and high performance coating. VF 330 is specially formulated for high abrasion resistance and offers the best combination of elastomeric waterproofing, corrosion protection, and abrasion resistance. VF 330 can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of substrates, and complex geometries.

VersaFlex VF-380 is a 100% solids, fast setting, plural component, ultra-low shrink, polyurea elastomer and high performance coating. VF-380 is primarily designed for foam, geotextile and other non-reinforced substrates due to its specially designed low shrink formulation, but has excellent bond to steel, concrete, masonry and other properly prepared substrates. VF-380 is an excellent coatings solution for industrial applications requiring a resilient liner for waterproofing or secondary containment.

VersaFlex VF380-F is a 100% solids elastomeric polyurea developed for applications such as geotextile lining membranes. VF380-F may also be applied to concrete and steel substrates. VF380-F is a volatile free, odorless system applied with 1:1 mix ratio with plural component spray equipment. VersaFlex VF380-F provides less shrinkage with improved elongation characteristics. As a result, VF380-F makes an excellent polyurea for liners, geotextile coatings, and applications where resilience and durability are required. VF380-F may be applied at varying thicknesses in a single application using a multi-pass spray technique.

VersaFlex VF 502 “Hybrid” Polyurea is a fast set, rapid curing, 100% solids, flexible, two-component polyurethane/polyurea elastomer spray coating material. VF 502 was developed for use in high-pressure spray equipment and is used by itself or in combination with other materials to produce a protective coating on metal, concrete, aluminum, and composite substrates. VF 502 creates an extremely tough film at all thicknesses and can produce films from 10 mils to 250 mils without visible sag or runs in single or multiple pass applications. This material is relatively moisture and temperature insensitive, allowing use in the most problematic ambient conditions.

VersaFlex FSS 50DM+ is a 100% solids, fast setting, plu-ral component, polyurea elastomer and high perfor-mance coating. FSS 50DM+ is primarily designed for properly prepared steel and metal substrates, however, due to it’s higher modulus, and faster gel times, FSS 50DM+ has excellent bond to concrete, masonry and other properly prepared substrates. FSS 50DM+ can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of sub-strates, and complex geometries.

VersaFlex FSS 45DC is a 100% solid, fast setting, plural component, polyurea elastomer and high performance coating. FSS 45DC is primarily designed for properly prepared concrete and masonry, due to it’s higher elongation and extended gel time, but will bond tenaciously to steel and other properly prepared substrates. FSS 45DC is an economical coatings solution for industrial applications requiring a resilient liner for waterproofing and/or abrasion resistance. FSS 45DC can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of substrates, and complex geometries.