Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
Ideal For
- Below grade waterproofing
- Wastewater facilities
- Steel, galvanized, and tin secondary containment
- Washout facilities
- Food processing, bottling and canning facilities
- Mining facilities
- Advantages
- Made in the USA at a ISO 9001:2015 Certified Facility
- 100% solid, no VOC’s
- Tough, resilient , elastomeric membrane
- Fast return to service
- Dry exposure range of –20°F to 250°F
- Excellent adhesion to steel
- Meets FDA 21CFR 175.300
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Coverage Rate
FSS 50DM is designed for a variety of substrates and applications. Application method, substrate roughness, profile, and porosity will effect coverage rates. Always consult the specification and contract documents prior to installation.
Recommended Dry Film Thickness (Typical exposure) Concrete 80-100+ mils dft. Steel (Carbon) 60-80 mils dft. High Abrasion Service 100-125 mils dft.
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| VOC | 0 | g/l | Theoretical |
| Solid Content | 100 | % | Theoretical |
| Gel Time | 3 - 5 | seconds | ASTM D1640 |
| Tack Free Time | 5 - 7 | seconds | ASTM D1640 |
| Light Traffic | 60 | minutes | ASTM D1640 |
| Tensile Strength | 3653 | psi | ASTM D638 |
| Elongation | 347 | % | ASTM D638 |
| 100% Modulus | 1418 | psi | ASTM D638 |
| 200% Modulus | 2028 | psi | ASTM D638 |
| 300% Modulus | 3009 | psi | ASTM D638 |
| Die C Tear Strength | 552 | pli | ASTM D624 |
| Hardness | 95 | Shore A | ASTM D2240 |
| Hardness | min. 50 | Shore D | ASTM D2240 |
| Adhesion to Steel | min. 500 | psi | ASTM D4541 |
| Adhesion to Concrete | min. 200 | psi | ASTM D7234 |
Safety & Health
- Cleanup and Safety
- Cleanup - Cured product may be disposed of without restriction. Excess material should be mixed together and allowed to cure and disposed of in a normal manner. Product containers that are “drip free” may be disposed of according to local, state, and federal laws.
- Caution: VersaFlex FSS 50DM+ contains isocyanate. All safety precautions must be followed including proper skin protection and breathing protection. Consult SDS for proper safety suggestions.
- Safety - Read, understand, and follow all recommendations on the SDS. Review SDS at www.versaflex.com Wash thoroughly after handling, and before eating, drinking, or smoking. Have proper First Aid and PPE on site prior to opening or processing the material. Use chemical safety glasses, or goggles with splash shields. Use impervious body coverings including long sleeve clothing and boots. Use neoprene or nitrile chemical resistant gloves. Use a combination particulate filter and organic vapor respirator.
Packaging & Availability
- Packaging
FSS 50DM is available in 10-gallon, 30-gallon, 60-gallon, 106-gallon, and 530-gallon kits. The containers are filled by weight.
Storage & Handling
- Shelf-Life and Storage
One year from date of shipment, in original, unopened factory containers, stored in a sheltered area between 60°F - 95°F. Seal tightly after use to prevent introduction of moisture laden air. Store open ‘A’ side with a nitrogen cap after each use.