Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- No surface prep
- Excellent Strength
- Impact Resistant
- 100% Reactive
- Room Temperature Cure
- Easily Applied
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Cure Method
- Applications
Vibra-Tite PB310 is suitable for bonding combinations of the following substrates
Metals- Aluminum
- Steel
- Stainless
- Coated Metals
Thermosets
- Fiberglass
- Gel Coats
- Epoxy
- Rim Urethane
- Polyurethane
- Liquid Molding Resins
- Thermoplastics
- Acrylics
- ABS
- Polycarbonate
- PPOs
- PVC
- Vinyl’s
- Polystyrenes
- PBT & PET Blends
Ceramics
- Glass
- Zeolites
- Application and Handling Guidelines
The product is best used at temperatures between 65 °F and 80 °F. Temperatures below 65 °F will slow the cure speed of the material and viscosities will be higher. Temperatures above 80 °F will cause the material to cure faster and viscosities will be lower. For consistent dispensing maintain the temperature in the above-mentioned range.
For optimum bond strength and to ensure maximum performance in the finished assembly, join parts together within the specified work time of the adhesive. Make sure the bond joint has uniform coverage and that a sufficient amount of adhesive is in the bond area. It is important to have the adhesive applied, parts aligned and positioned, within the established work times for the product. To ensure maximum performance in the finished assembly parts should remain undisturbed until the fixture time is reached.
Clean-up is best before the adhesive has cured. Cleaners containing acetone or Citrus terpene provide the best results. On cured adhesive repeat use may be required.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity ( 25°C Resin) | 40,000-80,000 | cps | - |
| Viscosity ( 25°C Activator) | 100,000- 140,000 | cps | - |
| Specific Gravity... | 1.03 | - | - |
| Mix Ratio: By Volume | I to 1 | - | - |
| Mix Ratio: By Weight | to 1 | - | - |
| Thixotropic Index | 2022-04-05 | - | - |
| Flash Point | 51.0 | °F | - |
| Shear Strength | 750-2800 | psi | - |
| Tensile Strength | 2500-3500 | psi | - |
| Work Time | 2022-08-15 | minutes | - |
| Handling Strength | 18-25 | minutes | - |
| Gap Fill | 0.25 | inches | - |
| Temperature Range | -60 -+250 | °F | - |
Safety & Health
- Precautions
Vibra-Tite PB310 is flammable. Keep away from heat, spark, and open flames. KEEP OUT OF REACH OF CHILDREN. THE PRODUCT IS FOR INDUSTRIAL USE ONLY. Keep containers closed when not in use. Avoid contact with skin and eyes. Harmful if swallowed. Refer to Material Safety Data Sheet for complete safety information.
Storage & Handling
- Storage and Shelf Life
The shelf life of the Vibra-Tite PB310 is 12 months from date of shipment. Shelf life is based on the products being stored properly at temperatures between 55 °F and 75 °F. Exposure to temperatures above 75 °F will reduce the shelf life of these materials. These products should NEVER BE FROZEN.