Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- CHARACTERISTICS
High molecular weight
Balanced thermo-mechanical properties
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- PROCESSES
Injection molding
Extrusion sheets
Extrusion thermoforming in-line- Applications
Disposable items
Refrigeration (internal parts)
Mixture with HIPS in sheet extrusion
Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Vicat softening point (10 N, 50°C/h) | 1.05 | °C | 75 |
Deflection temperature under load (1.8 MPa, 120°C/h) | 106 | °C | 180/1A |
Flexural strength | 98 | MPa | 178 |
Tensile modulus | 94 | MPa | 527 |
Tensile strain at break | 3250 | % | 527 |
Tensile stress at break | 50 | MPa | 527 |
Value | Units | Test Method / Conditions | |
Density | 0.3 - 0.6 | g/cm³ | 306 |
Molding shrinkage | HB | % | 1183 |
Value | Units | Test Method / Conditions | |
Melt flow rate (200°C, 5 Kg) | 5 | g/10 min | 1133 |
Flame behavior - thickness 1.5 mm | 1.04 | Classe Class | 294 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- LEGISLATION
If used in its natural form and under the recommended processing conditions, the product complies with the requirements of ANVISA 105/99 (Brazil) and GMC (Mercosur) and 21 CFR 177.1640 of the FDA (USA) and EU 10/2011 (European Union) regulations for use in contact with food. The product also fulfills the requirements of UL 94 under File Number E235814
- CERTIFICATIONS
ISO 9001:2015 and ISO 14001:2015 certified by ABS Quality Evaluations.
- RECYCLING
Innova recommends that items processed with their resins should be identified in accordance with ABNT NBR 13230, ASTM D7611 and D7611M-19 standards to assist in the identification, separation and recycling of materials
Safety & Health
- SAFETY
When processing under recommended conditions, a small amount of styrene vapors may be released. With appropriate ventilation and air renewal, the styrene concentration will stay at a level much lower than the exposure limit indicated by the ACGIH and will not pose a health hazard. Customers are requested to review the current MSDS before handling or using the product