Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- CHARACTERISTICS
Average melt flow, with good balance between rigidity and impact
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- PROCESSES
Extrusion and thermoforming
Injection molding- APPLICATIONS
Electronics
Packaging
Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tensile stress at break | 25 | MPa | 527 |
| Flexural strength | 50 | MPa | 178 |
| Izod impact strength, notched (4 mm) | 9 | kJ/m² | 180/1A |
| Tensile modulus | 2200 | MPa | 527 |
| Tensile strain at break | 45 | % | 527 |
| Value | Units | Test Method / Conditions | |
| Deflection temperature under load (1.8 MPa, 120°C/h) | 90 | °C | 75 |
| Vicat softening point (10 N, 50°C/h) | 96 | °C | 306 |
| Value | Units | Test Method / Conditions | |
| Molding shrinkage | 0.4 - 0.7 | % | 294 |
| Density | 1.04 | g/cm³ | 1183 |
| Flame behavior - thickness 1.5 mm | HB | Classe Class | UL-94 |
| Melt flow rate (200°C, 5 Kg) | 5.5 | g/10 min | 1133 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- LEGISLATION
If used in its natural form and under the recommended processing conditions, the product complies with the requirements of ANVISA 105/99 (Brazil) and GMC (Mercosur) and 21 CFR 177.1640 of the FDA (USA) and EU 10/2011 (European Union) regulations for use in contact with food. The product also fulfills the requirements of UL 94 under File Number E235814
- CERTIFICATIONS
ISO 9001:2015 and ISO 14001:2015 certified by ABS Quality Evaluations
Safety & Health
- SAFETY
When processing under recommended conditions, a small amount of styrene vapors may be released. With appropriate ventilation and air renewal, the styrene concentration will stay at a level much lower than the exposure limit indicated by the ACGIH and will not pose a health hazard. Customers are requested to review the current MSDS before handling or using the product
Packaging & Availability
- RECYCLING
Innova recommends that items processed with their resins should be identified in accordance with ABNT NBR 13230, ASTM D7611 and D7611M-19 standards to assist in the identification, separation and recycling of materials.