Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- CHARACTERISTICS
High stress cracking resistance (ESCR)
Good mechanical properties and impact resistance
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- PROCESSES
Extrusion and thermoforming
Injection molding
- APPLICATIONS
Refrigeration (refrigerator doors and inner liner)
Greasy foods packaging (e.g. margarine)
Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Tensile stress at break | 24 | MPa | 527 |
Flexural strength | 35 | MPa | 178 |
Izod impact strength, notched (4 mm) | 15 | kJ/m² | 180/1A |
Tensile modulus | 1750 | MPa | 527 |
Tensile strain at break | 65 | % | 527 |
Value | Units | Test Method / Conditions | |
Deflection temperature under load (1.8 MPa, 120°C/h) | 84 | °C | 75 |
Vicat softening point (10 N, 50°C/h) | 98 | °C | 306 |
Value | Units | Test Method / Conditions | |
Molding shrinkage | 0.4 - 0.7 | % | 294 |
Density | 1.04 | g/cm³ | 1183 |
Flame behavior - thickness 1.5 mm | HB | Classe Class | UL-94 |
Melt flow rate (200°C, 5 Kg) | 3.5 | g/10 min | 1133 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- LEGISLATION
If used in its natural form and under the recommended processing conditions, the product complies with the requirements of ANVISA 105/99 (Brazil) and GMC (Mercosur) and 21 CFR 177.1640 of the FDA (USA) and EU 10/2011 (European Union) regulations for use in contact with food. The product also fulfills the requirements of UL 94 under File Number E220962.
- CERTIFICATIONS
ISO 9001:2015 and ISO 14001:2015 certified by ABS Quality Evaluations.
- RECYCLING
Innova recommends that items processed with their resins should be identified in accordance with ABNT NBR 13230, ASTM D7611 and D7611M-19 standards to assist in the identification, separation and recycling of materials.
Safety & Health
- SAFETY
When processing under recommended conditions, a small amount of styrene vapors may be released. With appropriate ventilation and air renewal, the styrene concentration will stay at a level much lower than the exposure limit indicated by the ACGIH and will not pose a health hazard. Customers are requested to review the current MSDS before handling or using the product