Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
Thick-Kote™ is formulated for easy application by brush or trowel, but can also be sprayed if needed. Its recommended dry thickness ranges from 40 mils to 63 mils depending on the degree of protection required, and when properly applied within this thickness range, it provides excellent protection from the elements, other sources of water, and physical damage over a wide range of temperatures. These dry film thicknesses are achieved at a wet application of four to six gallons per 100 sq. ft. Thick-Kote™ should not be applied where it will be subjected to continual standing water or where the requirement is for a vapor barrier.
- Cleanup
- Wet state - water
- Dry state - safety solvent
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Application Temperature Range | 40 - 100 | °F | — |
| Coverage (1.88 mm) | 0.65 | m²/liter | ASTM C 461 |
| Coverage (2.8 mm) | 0.42 | m²/liter | ASTM C 461 |
| Drying Time (Through) | 12 - 48 | Hours | ASTM D 1640-69 |
| Drying Time (To Touch) | 2.0 | Hours | ASTM D 1640-69 |
| Service Temperature Range (Constant) | 0 - 180 | °F | — |
| Service Temperature Range (Intermittent) | -20 to 200 | °F | — |
| Solids (By Volume) | 64 - 68 | % | — |
| Solids (By Weight) | 73.0 | % | — |
| Typical Elongation (60 mils Dry, 70°F) | 150.0 | % | — |
| VOC (Less Water) | 12.0 | g/L | ASTM D 3960 |
| Weight per Gallon | 11.3 | Pounds | ASTM D 1475 |
| Wet Flammability (Closed Cup) | No flash to boiling (212°F) | — | ASTM D 93 |
Regulatory & Compliance
- Certifications & Compliance
- Regulatory
Meets requirements for LEED credit 4.2
Safety & Health
- Caution
Do not add water to this product as that will change its physical properties and performance. No expressed or implied warranty will be offered on applications where the product has been thinned or altered.
Storage & Handling
- Storage
Thick-Kote™ must be protected from freezing during storage. After application, until thoroughly cured, it must be protected from precipitation, freezing, oil, grease, and foot traffic.
- Recommended Shelf Life
12 months in unopened container at 40°F (4°C) to 90°F (32°C)