Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
Features & Benefits
- Materials Features
- Features
- High optical quality, without distortion and transparent.
- Colors with the highest brightness on the market and maximum resistance to aging.
- It is easily machined.
- It allows to be slightly cold bent.
- It can be thermoformed.
- Lighter than glass.
- Impact resistence.
- Low thermal conductivity.
- UV light received at the surface is converted into visible light, and much of it is emitted from the edges.
- The reliefs made on the surface light up the same as the edges, allowing high-contrast engravings on the surface.
- Very good light conduction over the entire surface, as they are only illuminated at the edges.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Applications
- Decoration pieces (gift, florist, hospitality, etc.)
- Security elements, where your display is required to stand out.
- Furniture.
- Lettering with side lighting and surface engraving.
- PLV.
Properties
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Density | 1.2 | g / cm3 | ISO 1183 |
Water Absorption | 0.18 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Elongation at Break (Test Type 1, Speed B) | 11.0 | % | ISO 527 |
Flexural Srength | 124.0 | MPa | ISO 178 |
Impact Resistance (Charpy Method) | min. 13 | kJ / m-2 | ISO 179 / 2D |
Modulus of Elasticity in Tension (Test 1, Speed B) | 3000.0 | MPa | ISO 527 |
Rockwell Hardness | 100.0 | — | ISO 2039-2 |
Tensile Srength (Test 1, Speed B) | 72.0 | MPa | ISO 527 |
Value | Units | Test Method / Conditions | |
Bending Temperature under Load (Method A, 1.8MPa) | 101.0 | °C | — |
Coefficient of Linear Expansion | 70.6 x 10^-6 | K-1 | — |
Dimensional Variation at Elevated Temperature (Shrinkage) | 23.0 | % | — |
VICAT Softening Temperature | 110.0 | °C | — |
Value | Units | Test Method / Conditions | |
Dielectric Constant (1Megahertz) | 2.8 | — | DIN53483 |
Dielectric Constant (50 Hz) | 3.6 | — | DIN53483 |
Specific Resistance | min. 10^15 | Ohm | DIN53458 |
Volume Resistance | min. 10^15 | Ohm cm | DIN53458 |
Packaging & Availability
- Formats
- Size:
- They are manufactured with the European standard of 3050 x 2050 mm.
- They can be supplied cut to size.
- Thicknesses:
- The standard is 3mm.
- It can be manufactured in any thickness upon
request.
- Size: