Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features & Benefits
- Improved Cystallisation - Molybdenum Disulphide is added resulting in improved crystallization. This process increases the superficial hardness of the material, improving its anti-friction & dimensional stability properties.
- Suitable for High Operating Temperatures - The crystal structure of PA6 Moly breaks down immediately before the melting temperature is reached, the thermal properties of the Moly are improved over standard PA6 grade. To learn more view the product technical information.
- Excellent Machining Properties - The increased superficial hardness provides Moly with excellent machinability and general mechanical properties.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Color
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
Value | Units | Test Method / Conditions | |
Tensile Strength at Yield (Sample Type 1B, 50mm/min) | 85.0 | MPa | ISO 527-1/2;1993 |
E-modulus (Sample Type 1B, 50mm/min) | 4100.0 | MPa | ISO 527-1/2:1993 |
Elongation at Break (Sample Type 1B, 50mm/min) | max. 20 | % | ISO 527-1/2:1993 |
Compressive Strength (Sample Type B, 5mm/min) | 105.0 | MPa | ISO 604:2002 |
Compressive Modulus (Sample Type A, 1mm/min) | 3000.0 | MPa | ISO 604:2002 |
Flexural Strength (1.5mm/min) | 115.0 | MPa | ISO 178:2001 |
Flexural Modulus (1.5mm/min) | 3700.0 | MPa | ISO 178:2001 |
Izod Impact Strength (Sample Type A, notched) | 4.5 | kJ/mm² | ISO 180:2000 |
Dynamic Coefficient of Friction (31.4m/min, 1.75MPa) | 0.25 | — | — |
K-Factor (Wear Factor, 31.4m/min, 1.75MPa) | 2.2x10⁻⁵ | mm³/Nm | — |
Hardness | 85.0 | Shore D | ISO 868:2003 |
Value | Units | Test Method / Conditions | |
Density (Test Method A) | 1.15 | g/cm³ | ISO 1183:1987 |
Water Absorption (24 hrs, Immersion at 23°C) | 0.2 | % | ISO 62:1999 (modified) |
Water Absorption (24 hrs Saturation, Immersion at 23°C) | 6.0 | % | ISO 62:1999 |
Value | Units | Test Method / Conditions | |
Melting Temperature (Tg) | 220.0 | °C | — |
Glass Transition Temperature | 68.0 | °C | ISO 11359:1999 |
Heat Deflection Temperature (HDT/A, 1.80MPa) | 80.0 | °C | ISO 75 |
Maximum/Minimum Continuous Service Temperatures | 105/-40 | °C | — |
Maximum/Minimum Intermittent Service Temperatures | 170/-100 | °C | — |
Coefficient of Linear Thermal Expansion (23 - 55°C) | 8x10⁻⁵ | °C⁻¹ | ISO 11359-2:1999 |
Thermal Conductivity (Mean T = 20°C) | 0.26 | W/m°C | ISO 8301:1991 |
Value | Units | Test Method / Conditions | |
Dielectric Constant (1MHz) | 3.7 | — | IEC 60250:1969-01 |
Dielectric Constant (Low Frequency, 100 Hz) | 4.0 | — | IEC 60250:1969-01 |
Dielectric Strength | 25.0 | kV/m | IEC 60243:-1:1998-01 |
Volume Resistivity | 1x10¹³ | ohm.m | IEC 60093:1980-01 |
Surface Resistivity | 1x10¹² | ohm.m | IEC 60093:1980-01 |
Comparative Tracking Index | 600.0 | CTI | IEC 60112:2003-01 |
Value | Units | Test Method / Conditions | |
Flammability | HB | — | IEC 60695-11-10:2003-08 |
Packaging & Availability
- Availability
Rod 10mm-500mm DIA Tube 50mm-1500mm OD Plate 8mm-100mm THICKNESS Cut to size Available upon request