Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Color
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Yield (Sample Type 1B, 50mm/min) | 36.0 | MPa | ISO 527-1/2;1993 |
| E-modulus (Sample Type 1B, 50mm/min) | 2700.0 | MPa | ISO 527-1/2:1993 |
| Elongation at Break (Sample Type 1B, 50mm/min) | 1000.0 | % | ISO 527-1/2:1993 |
| Compressive Strength (Sample Type B, 5mm/min) | 110.0 | MPa | ISO 604:2002 |
| Compressive Modulus (Sample Type A, 1mm/min) | 2600.0 | MPa | ISO 604:2002 |
| Flexural Strength (1.5mm/min) | 36.0 | MPa | ISO 178:2001 |
| Flexural Modulus (1.5mm/min) | 1400.0 | MPa | ISO 178:2001 |
| Izod Impact Strength (Sample Type A, notched) | 7.2 | kJ/m² | ISO 180:2000 |
| Charpy Notched Impact Strength (Notched, 23°C) | 12.0 | kJ/m² | ISO 180:2000 |
| Dynamic Coefficient of Friction (31.4m/min, 1.75MPa) | 0.18 | — | — |
| Limiting PV | 6.0 | MPa/m | — |
| Hardness | 65.0 | Shore D | ISO 868:2003 |
| Value | Units | Test Method / Conditions | |
| Density (Test Method A) | 0.95 | g/cm³ | ISO 1183:1997 |
| Moisture Absorption (Equilibrium, 50% RH, 23°C) | 0.1 | % | ISO 62:1999 |
| Water Absorption (24 hrs, Immersion at 23°C) | 0.01 | % | ISO 62:1999 (modified) |
| Water Absorption (24 hrs Saturation, Immersion at 23°C) | 0.01 | % | ISO 62:1999 |
| Value | Units | Test Method / Conditions | |
| Melting Temperature (Tg) | 133.0 | °C | — |
| Glass Transition Temperature | -60.0 | °C | ISO 11359:1999 |
| Heat Deflection Temperature (HDT/A, 1.80MPa) | 110.0 | °C | ISO 75 |
| Maximum Continuous Service Temperatures | 68.0 | °C | — |
| Maximum Intermittent Service Temperatures | 140.0 | °C | — |
| Coefficient of Linear Thermal Expansion (23 - 55°C) | 20x10⁻⁵ | °C⁻¹ | ISO 11359-2:1999 |
| Thermal Conductivity (Mean T = 20°C) | 0.31 | W/m°C | ISO 8301:1991 |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant (1MHz) | 2.18 | — | IEC 60250:1969-01 |
| Dissipation Factor (100 Hz) | 0.005 | — | IEC 60250:1969-01 |
| Dielectric Strength | 16.5 | kV/m | IEC 60243:-1:1998-01 |
| Volume Resistivity | 1x10¹³ | ohm.m | IEC 60093:1980-01 |
| Surface Resistivity | 1x10¹³ | ohm.m | IEC 60093:1980-01 |
| Comparative Tracking Index | 600.0 | CTI | IEC 60112:2003-01 |
| Value | Units | Test Method / Conditions | |
| Flammability | HB | — | IEC 60695-11-10:2003-08 |
Packaging & Availability
- Availability
Rod 10mm-500mm DIA Tube 50mm-1000mm OD Plate 6mm-100mm THICKNESS Cut to size Available upon request