company tower banner
Vosschemie benelux Company Logo

Vosschemie benelux ACRYLIC 1-C TOP COAT

Vosschemie Benelux Acrylic 1-C Top Coat is a 1 component which is maximum 500 g/l, solvent-containing acrylic polymer that dries quickly and can be walked on. This sealing layer provides a matt, scratch-resistant, UV-resistant protective layer that adheres well to most surfaces, but in particular to natural stone and the Flexo cast floor. Excellent resistance to solvents and chemicals, diluted acids and alkalis.

Chemical Family: Acrylics & Acrylates

End Uses: 1K (1 component) Coating, Top Coat

Compatible Substrates & Surfaces: Marble, Wood

Features: Acid Resistance, Alkali Resistance, Chemical Resistance, Excellent Scratch Resistance, Fast Drying, Matting, Solvent Resistance, UV Resistance

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
CASE Ingredients Functions
Technologies

Features & Benefits

Applications & Uses

Application Method
Compatible Substrates & Surfaces
Application

For finishing the 2 K PUR Flexo cast floor. Gives the surface improved UV resistance and scratch resistance. It is easy to work with, very wear and scratch resistant, makes it dust-free and provides an easy-tomaintain surface. Very good chemical resistance and equipped with UV filters.

Processing

Always ensure that the surface is as dry and free of grease as possible and apply the layer with a suitable fur roller (microfibre roller). Only open cans when the material in them is actually going to be processed. Once opened, process as much as possible immediately and do not store. Mix the coating well beforehand until it is a homogeneous mass. Divide the layer with an 18 cm microfibre roller both vertically and horizontally and then roll again vertically. Within 5 minutes, the coating must be rolled again vertically with a dry and as wide as possible microfibre roller. Apply the coating with a maximum of 200 gr/m², as this can cause foaming. Always use nylon rollers and make sure they are new and well moistened from the coating. The next layer can be applied after 2 hours, with a maximum of 24 hours, because then a light mechanical roughening must first be done. Minimum processing temperature 5°C and maximum: 30°C

Properties

Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Viscosity1000.0Mpa
Specific Weightapprox. 1.30g/cm³
Consumption200.0g/m²

Safety & Health

Safety

Always provide appropriate protective clothing and gloves. Avoid prolonged contact with the skin. Cleaning agent for tools: cleaner M and for hands: hand cleaner Slig (soap Stockhausen). Provide adequate ventilation. Wear a filter mask.

Packaging & Availability

Availability

Available in 0.5 kg, 1 kg, 2.5 kg and 13 kg packages.

Storage & Handling

Shelf Life
12 months (in Closed Packaging Liquid)