Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
- Instructions For Use
Mix the two components thoroughly and apply with a brush or a wool roller onto the prepared surface. A porous surface - such as wood or concrete - should first be primed with G4. Sand blasted metals need not to be primed. Vertical areas should be coated twice to achieve a sufficient layer thickness of approx. 300-400 my. The second coat must be applied within 24 hours. The ideal working temperature is 20°C. Maximum strength will be reached after 3-5 days. If the working temperature is lower (minimum 10°C), the potlife and curing time are lengthened. However, the potlife is highly dependant on the amount of the resin in the mixing container. The amount used per coat is approx. 250 g/m². BN EPOXY is suitable as casting material for layers up to approx. 3 cm thick. The BN system is highly resistant against alkalis and many organic solvents.
Features & Benefits
Applications & Uses
- Applications
- Application
- Coating and casting resin for porous and flat surfaces. Encapsulation of electric wiring.
- Water proof coating for gutters, pipes and tanks made of concrete or steel. Casting resin for cracks or defects in concrete and other materials. Encapsulation of electric wiring and other cavities.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Compressive Strength | 70.0 | N/mm² | — |
Tensile Strength | 19.0 | N/mm² | — |
Flexural Strength | 57.0 | N/mm² | — |
Mixing Ratio (A:B) | 100 : 25 | — | — |
Viscosity of Mixture (20°C ca.) | 2.7 | Mpa | — |
Time (20°C 200 g mix ca.) | 40.0 | minutes | — |
Safety & Health
- Safety
The before mentioned technical data and information, especially the recommendations for applying and using our products, are based on our current knowledge and experience when applied under normal conditions. In practice, the materials, surfaces or site conditions are so different that no warranty regarding the working results or liability, arising out of any relationship, can be inferred neither from this information nor from a verbal consultation. Directions for handling and waste disposal are in our Security Safety Data Sheet and the specifications of the Employers Liability Insurance Association for the chemical industry.
Storage & Handling
- Shelf Life
- 6 months (Unopened Original Container)