Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
- Structure
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Application Method
- Coating Type
- Uses
Parylene F is the best choice for:
Applications with higher temperature and UV requirements.
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Film Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Coefficient of Friction (static and dynamic) | 0.35 | — | — |
| Hardness | R80 | — | Rockwell |
| Young’s Modulus | 3.0 | GPa | — |
| Young’s Modulus | 3 | GPa | — |
| Tensile Strength | 55.0 | MPa | — |
| Tensile Strength | 55 | MPa | — |
| Yield Strength | 52.0 | MPa | — |
| Yield Strength | 52 | MPa | — |
| % Elongation to Break | 10 - 50 | % | — |
| Elongation to Break | Oct-50 | % | — |
| Elongation at Yield | 2.4 | % | — |
| Density | 1.652 | g/cm³ | — |
| Hardness (Rockwell) | R80 | R | — |
| Coefficient of Friction (Static) | 0.35 | — | — |
| Coefficient of Friction (Dynamic) | 0.39 | — | — |
| Value | Units | Test Method / Conditions | |
| Gas Permeability (Oxygen at 25°C) | 16.7 | cc*mm/m²*day*atm | — |
| Penetration Power | 30 X | — | — |
| USP Class VI Polymer | Yes | — | — |
| Value | Units | Test Method / Conditions | |
| Short Term Service Temperature (in oxygen environments) | 250 | °C | — |
| Continuous Service Temperature (in oxygen environments) | 200 | °C | — |
| Linear Coefficient of Thermal Expansion (at 25° C) | 45 | ppm/°C | — |
| Thermal Conductivity (at 25° C) | 0.1 | W/m*K | — |
| Melting Point | 435.0 | °C | — |
| Melting Point | 435 | °C | — |
| Short-term Service Temperature (Oxygen Environment) | 250.0 | °C | — |
| Continuous Service Temperature (Oxygen Environment) | 200.0 | °C | — |
| Linear Coefficient of Thermal Expansion (25° C) | 45.0 | ppm/°C | — |
| Thermal Conductivity (25°C) | 0.1 | W/mK | — |
| Value | Units | Test Method / Conditions | |
| Oxygen gas permeability (25°C) | 16.7 | (ccxmm)/(m²xdayxatm) | — |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength (25.4microns) | 276.0 | V/micron | — |
| Dielectric Strength (0.001”) | 7000.0 | V/mil | — |
| Volume Resistivity (23°C, 50% RH) | 1.1x10¹⁷ | ohm-cm | — |
| Surface Resistivity (23°C, 50% Relative Humidity) | 4.7x10¹⁷ | ohms | — |
| Dielectric Constant (60Hz) | 2.2 | — | — |
| Dielectric Constant (1KHz) | 2.25 | — | — |
| Dielectric Constant (1MHz) | 2.42 | — | — |
| Dissipation Factor (60Hz) | 0.0002 | — | — |
| Dielectric Strength (at 0.001”) | 7 | KV/mil | — |
| Dissipation Factor (1KHz) | 0.0002 | — | — |
| Dissipation Factor (1MHz) | 0.008 | — | — |
| Volume Resistivity (at 23°C, 50% RH) | 1.1x10¹⁷ | ohm-cm | — |
| Surface Resistivity (at 23°C, 50% Relative Humidity) | 4.7x10¹⁷ | ohms | — |
| Dielectric Constant (at 1MHz) | 2.42 | — | — |
| Dissipation Factor (at 1MHz) | 0.008 | — | — |
Regulatory & Compliance
- Certifications & Compliance