Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Top Coats
- Catalyzed epoxies
- Coal tar epoxy
- Vinyls, phenolics
- Acrylics
- Chlorinated rubbers
- Urethanes
- Emulsions
- Alkyds
- Application Instructions
Surface Preparation:
New Steel - Surface must be dry and free of contamination. Remove all weld spatter and grind all rough welds and edges to smooth contour. For severe exposure (immersion, chemical, etc) near white blast clean per SSPC SP 10-63T. For other exposure blast clean per SSPC SP 6-63 to a maximum profile of 1.5 mils. Previously Painted Surfaces - Must be free of oil, grease or other contamination. For best results, spot blast exposed areas to be primed. Power tool brushing may be used for minor touch up.
Spray/Brush/Roll:
Surface shall be dry, above 60° F and 5° above dew point, and free of rust bloom. Spray apply using airless spray or air assisted airless spray. For air atomized spray, fluid tips of .070" and air caps delivering 9-10 CFM at 30 PSI are acceptable. A 3/8" to 1/2" material hose is recommended. Plural component is recommended. Materials should be kept under constant slow speed agitation during use. Double lap all welds, seams, corners, and edges in insure proper thickness. Make even parallel passes with 50% overlap to provide uniformity.
Properties
- Pot Life (70°F)
- min. 6
- Physical Properties
Value | Units | Test Method / Conditions | |
Mix Ratio (A:B) | 4:1 | - | - |
Weight | 18.33 - 18.73 | lbs/gallon | - |
Solids (by Weight) | 83 - 87 | - | - |
Solids (by Volume) | 61.3 - 63.3 | - | - |
VOC | 2.79 | /gal | - |
Viscosity | 45 - 55 | s | Zhan 2 |
Coverage (1 mils, dry, 100 % efficiency) | 999.0 | sf/gal | - |
Dry Time (Re-Coat) | min. 30 | mins | - |
Dry Time (Top Coat) | min. 30 | mins | - |
Wet Film Thickness | 3.25 - 6.50 | mils | - |
Dry Film Thickness | 2 - 4 | mils | - |
Safety & Health
- Safety and Handling
Proper precautions should be taken to assure operator protection, including explosion-proof electrical fixtures when applied indoors.
Storage & Handling
- Shelf Life
- 12 Months
- Caution
- Heat will shorten workable pot life