Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Reducible with water
- Fast dry
- Recoatable within 24 hours with minimal surface preparation
- Excellent exterior durability
Applications & Uses
- Application Method
- Compatible Substrates & Surfaces
- Application Instructions
Surface Preparation:
- New Steel: Surface must be dry and free of contamination. Remove all weld spatter and grind all rough welds and edges to smooth contour.
- Previously Painted Surfaces: Must be free of oil, grease, or other contamination. For best results, spot blast exposed areas to be primed. Power tool brushing may be used for minor touch up.
Spray:
- Thoroughly mix coating prior to applying to substrate. Surface shall be dry, above 60° F and 5° above the dew point, and free of rust bloom. Double lap all welds, seams, corners, and edges to insure proper thickness. Make even parallel passes with 50% overlap to provide uniformity.
- This product has been formulated to be used at full strength. If reduction is required, water should be used.
Properties
- Color
- Physical Properties
Value | Units | Test Method / Conditions | |
VOC | max. 3.5 | lb/gal | - |
Flash Point (TCC) | 130.0 | °C | - |
Solids (by Weight) | 2406 - 33.2 | % | - |
Solids (by Volume) | 21.2 - 27.1 | % | - |
Coverage (1 mils, 100.0% efficiency) | 347 - 426 | sq. ft./gallon | - |
Dry (To Touch) | 30 - 45 | mins | - |
Dry (To Handle, 75°F) | 2 - 4 | h | - |
Hard Dry (75°F) | 24.0 | h | - |
Closs (60°C) | 80 - 90 | - | - |
Wet Film Thickness | 3.7 - 5.9 | mils | - |
Dry Film Thickness | 1 - 1.3 | mils | - |
Salt Fog (500 Hours, Rating) | Pass | - | ASTM B-117 |
Humidity (1000 Hours) | Pass | - | ASTM D-2247 |
Impact | Good | - | - |
Flexibility | Good | - | - |
Hardness | HB-H | - | - |
pH | 8 - 8.8 | - | - |
Weather-Ometer | 300.0 | h | ASTM D-4587 |
Freeze-Thaw (5 Cycles) | Pass | - | - |