Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
WS 102 has a flexibility of 7% at 20°C (68°F) and a long pot life of 35 minutes, allowing for larger batches and a faster turn around time with minimal labor. WS 102 is approved by CFIA (Canadian Food Inspection Agency) if incidental contact should occur in federally and provincially inspected meat/poultry plants.
- Features
- Fast curing
- Long pot life (35 minutes at 20°C (68°F)
- Excellent compressive, flexural and tensile strengths
- Fill and hides minor surface imperfections
- Strong chemical resister
- Good vapor permeability
- Good workability
- Low odor
- May be used as a filler when mixed with sand
- May be tinted
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Uses
WS 102 fills and seamlessly hides surface imperfections, as well as hairline cracks, to become an integral component of the substrate as it is used on interior applications to waterproof and protect new or existing, interior horizontal concrete structures (including: aircraft hangars, vehicle repair bays, paper mills, service stations, water treatment facilities, waste treatment facilities, meat packing and food processing facilities, dairies, canneries, etc.) and protects:
- Fast curing
- Substrate from chemicals including: gasoline, aviation fuel, brake fluids, alkalis and solvents
- Leakage and moisture intrusion
- Scaling and spalling
- Deterioration of reinforcing steel caused by chloride, acid, ingress, etc.
- Application
Application Method - Squeegee, roller or trowel
Mixing Method - Low speed jiffy mixer
Properties
- Color
- Appearance
- Clear
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Adhesion | 350.0 | psi | ASTM D4541 |
| Compressive Modules | 331000.0 | psi | ASTM D695 |
| Compressive Strength | 13100.0 | psi | ASTM D695 |
| Coverage (6 mils WFT) | 270.0 | sq. ft./gallon | - |
| Film Thickness (Dry) | 6.0 | mils | - |
| Elongation at Break | 7.0 | % | ASTM D638 |
| Flash Point | min. 280 | °C | - |
| Flexural Strength | 12400.0 | psi | ASTM D790 |
| Hardness | 82.0 | Shore D | ASTM D2240 |
| Izod Impact Strength | 0.52 | ft. lbs./in. notch | ASTM D256 |
| Mix Ratio | 2 volumes Resin (A) with 1 volume Hardener (B) | - | - |
| Recommended WFT | 6 - 20 | mils | - |
| Solids Content | 100.0 | % | - |
| Specific Weights (Hardener) | 8.1 | lbs/gallon | - |
| Specific Weights (Resin) | 9.6 | lbs/gallon | - |
| Taber Abrasion (CS-10, 100 cycles) | 33 mg loss | mg loss | ASTM D4060 |
| Tensile Modulus | 433000.0 | psi | ASTM D638 |
| Tensile Strength | 8200.0 | psi | ASTM D638 |
| Viscosity (25.5°C) | 940.0 | CP | - |
| VOC | 0.0 | g/L | - |
| Water Resistance | 0.16 | % | ASTM D570 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging
- 3 Gallon Kit (short-filled)
- 2 Gallons Part A
- 1 Gallon Part B
- 15 Gallon Kit
- 10 Gallons Part A
- 5 Gallons Part B
- 165 Gallon Bulk Kit
Storage & Handling
- Pot Life (20°C)
- 35 minutes
- Shelf Life
- 1 year, unopened