Weatherskin Coatings WS 107 Polyaspartic

Identification & Functionality

Product Type: 2K (2 component) Coating,
Base Coat,
Solventless & High Solids Coating,
Top Coat
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Base Coats & Undercoats,
Top Coats

Features & Benefits

Labeling Claims: Odor-free,
VOC-free
Ready-to-Use Product Features: Chemical Resistant,
Cleanable,
Durable,
Excellent Hot Tire Pickup Resistance,
Excellent Moisture Resistance,
Excellent Substrate Adhesion,
Fast Curing,
Fast Setting,
Good Abrasion Resistance,
Good Flexibility,
Good Mechanical Properties,
Good Smoothness,
High Solids Content,
Low Viscosity,
Microbe Resistant,
Odorless,
UV Resistant,
Waterproofing
Features: Zero VOC

No odor

Fast curing and reasonable working time

Rapid return to service after application

Easy to use

Long term durability

Excellent mechanical properties

Low viscosity, promoting concrete adhesion

Antimicrobial

UV and chemical resistant

Hot tire resistance similar to solvent-borne coatings

Produces an easy to clean, smooth surface free of any imperfections

Exceptional mechanical properties

Applications & Uses

Markets: Building & Construction
Applications: Building & Construction — Flooring & Surfaces
Floor Coatings
Application Area: Floor,
Garage,
Roofing Membranes,
Wall
Compatible Substrates & Surfaces: Concrete
Uses: WS 107 seals and waterproofs interior or exterior concrete substrates, such as: residentials (basement and garages), offices, showrooms, stores and warehouses; all the while, protecting the substrate from moisture intrusion, solubilized salts, wearing and spillage that may cause it to accelerate degradation. When mixed with aggregates including: silica sand, colored granules (mica) and plastic flakes, may be used to decorate or to create a durable, skid resistant surface. WS 107 is also great for displaying multicolored quartz aggregates and to enhance and restore existing concrete substrates.

Properties

	Value	Units	Test Method / Conditions
Adhesion to Concrete	380.0	psi	ASTM D
Elongation at Break	5.2	%	ASTM D
Flexibility	100.0	%	ASTM D
Gloss (60°)	min. 90	-	ASTM D523
Impact (Direct)	150.0	in. lbs	ASTM D2794
Impact (Reverse)	150.0	in. lbs	ASTM D2794
MEK Double Rubs	Softened	-	ASTM D4541
Pendulum Hardness	170.0	sec	ASTM D
Taber Abrasion (1000g Load, 1000 Cycles, CS-17 Wheel)	48.7	mg loss	TM-2 Method #9
Tensile Strength	8100.0	psi	ASTM D

Packaging & Availability

Packaging & Availability: Type Appearance Packaging Density

Part A (Resin) Clear, colorless, liquid 3.98 kg/ USG
19.89 kg/5 USG 1.09 kg/L

Part B (Hardener) Clear, colorless, liquid 4.13 kg/ USG
20.64 kg/5 USG 1.09 kg/L

Part A + Part B Clear coat 2 USG kits
10 USG kits
Mix 1:1 ratio by volume

Knowde Enhanced TDS