Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Sheen
- Matte
- Type
- Acrylic Elastomeric
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
WS M2 Elastormeric Waterproofing Membrane is an easy-to-use, liquid-applied, waterproof smart material formulated to cure into a seamless, heavy-duty, elastomeric coat to seal cracks and bridge small gaps. For larger imperfections, use Reinforcing Fabric as stated in the instructions.
- Features
- Single product capable for waterproofing a variety of different materials providing a more economical alternative to current procedures/products
- Flexible at low temperatures
- Exceptional elongation properties
- Bridges gaps up to 1/16”
- High solids content
- Non-toxic and environmentally friendly
- Highly alkaline resistant
- Does not sustain microbial and algae growth
- Passed ASTM D4300 (Ability of Adhesive Films to Support or Resist the Growth of Fungi)
- UV, acid rain and mildew resistant
- Passed ISO 16929 (Plastic-
- Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot scale)
- Protects structure from chemical damage caused by salts and acid rain
- Protects structure from mechanical damage from weather erosions (rain and sleet)
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Uses
WS M2 becomes an integral component to the construction of any structure as it bonds to a substrate. Ideal for commercial and industrial use, WS M2 Elastomeric Waterproofing Membrane seals and waterproofs:
- Foundation walls/ ICF
- Grain bins
- Stucco and block walls
- Building materials (Includes wood, plywood, OSB, stucco, concrete, concrete blocks, galvanized steel and polyurethane foam)
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Coverage | 120 - 200 | ft./gallon | - |
| Dries By (Full Cure) | 24.0 | Hours | - |
| Drying Time (20°C, Recoat) | 2.0 | Hours | - |
| Film Thickness (Dry) | 6 - 10 | mils per gallon | - |
| Film Thickness (Wet) | 10 - 12 | mils per gallon | - |
| Storage Temperature | 5 - 32 | °C | - |
| Surface Temperature at Application | 5 - 35 | °C | - |
| Viscosity (6 RPM) | 20000.0 | cps | - |
| VOC | max. 23 | g/L | - |
| Volume Solids | 55 - 65 | % | - |
Packaging & Availability
- Packaging
WSM2 36 x 5 USG pails on a pallet
5 USG pails
55 USG drumCaulking 12 cartridges/case
Reinforcing Fabric 12 rolls/case
Storage & Handling
- Shelf Life
Unopened, WS M2 has a shelf life of 12 months.